7 Mar
2007
7 Mar
'07
11:39 p.m.
I have the AT91RM9200EK board, and I want to do something with the USB host ports on the board, so I've put the following in my at91rm9200dk.h config file:
The at91rm9200dk.h configuration is for the DK board, not the EK.
Are you sure this can work?
Is the ohci driver really there? Check cpu/arm920t/at91rm9200
The OHCI is integrated on the chip, so there should be no problem in most cases to use the DK configuration. There are a few small differences, but normally they do not affect U-Boot.
Best regards,
Wolfgang Denk
Best Regards Ulf Samuelsson