1. Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs partition. This fixes the issue, when MMC controllers are probed in a different order in U-boot and Linux kernel. 2. Fix legacy USB command (both sdboot and usbboot can be used now).
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com --- include/configs/apalis-tk1.h | 62 ++++++++++++++++++++++++------------ 1 file changed, 41 insertions(+), 21 deletions(-)
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 1d296ba51a..ff6c5e425d 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -51,15 +51,22 @@ "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
#define EMMC_BOOTCMD \ - "emmcargs=ip=off root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait\0" \ - "emmcboot=run setup; setenv bootargs ${defargs} ${emmcargs} " \ - "${setupargs} ${vidargs}; echo Booting from internal eMMC " \ - "chip...; run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ + "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \ + "rw rootfstype=ext3 rootwait\0" \ + "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \ + "setenv bootargs ${defargs} ${emmcargs} " \ + "${setupargs} ${vidargs}; echo Booting from internal eMMC; " \ + "run emmcdtbload; " \ + "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ "bootm ${kernel_addr_r} - ${dtbparam}\0" \ - "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ - "${soc}-apalis-${fdt_board}.dtb && " \ - "setenv dtbparam ${fdt_addr_r}\0" + "emmcbootpart=1\0" \ + "emmcdev=0\0" \ + "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \ + "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb && " \ + "setenv dtbparam ${fdt_addr_r}\0" \ + "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \ + "emmcrootpart=2\0"
#define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ @@ -72,26 +79,38 @@ "&& setenv dtbparam ${fdt_addr_r}\0"
#define SD_BOOTCMD \ - "sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \ - "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ + "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} rw " \ + "rootfstype=ext4 rootwait\0" \ + "sdboot=run setup; run sdfinduuid; run set_sdargs; " \ + "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ "${vidargs}; echo Booting from SD card in 8bit slot...; " \ - "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ + "run sddtbload; load mmc ${sddev}:${sdbootpart} " \ + "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ "bootm ${kernel_addr_r} - ${dtbparam}\0" \ - "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ - "${soc}-apalis-${fdt_board}.dtb " \ - "&& setenv dtbparam ${fdt_addr_r}\0" + "sdbootpart=1\0" \ + "sddev=1\0" \ + "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \ + "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \ + "&& setenv dtbparam ${fdt_addr_r}\0" \ + "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \ + "sdrootpart=2\0"
#define USB_BOOTCMD \ - "usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \ - "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ + "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} rw " \ + "rootfstype=ext4 rootwait\0" \ + "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \ + "setenv bootargs ${defargs} ${setupargs} " \ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ - "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ + "run usbdtbload; load usb ${usbdev}:${usbbootpart} " \ + "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ "bootm ${kernel_addr_r} - ${dtbparam}\0" \ - "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ - "${soc}-apalis-${fdt_board}.dtb " \ - "&& setenv dtbparam ${fdt_addr_r}\0" + "usbbootpart=1\0" \ + "usbdev=0\0" \ + "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \ + "${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \ + "&& setenv dtbparam ${fdt_addr_r}\0" \ + "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \ + "usbrootpart=2\0"
#define BOARD_EXTRA_ENV_SETTINGS \ "boot_file=uImage\0" \ @@ -104,6 +123,7 @@ "fdt_fixup=;\0" \ NFS_BOOTCMD \ SD_BOOTCMD \ + USB_BOOTCMD \ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \ "flash_eth.img && source ${loadaddr}\0" \