Reading the AT91 related thread I digged a bit and maybe I found something strange between u-boot-1.1.2 and 1.1.3 ?
I usually use u-boot-1.1.2 using the "usual Atmel procedure"(TM) I removed T159 and booted, loading loader.bin in ram with xmodem, then it asked for the next file u-boot.bin that has been succesfully loaded. If I use u-boot-1.1.2 all is OK as with preinstalled 0.3.2
This is the result of my tests: Board AT91RM9200DK Kernel 2.6.13.2 u-boot always configured and compiled "as is" for at91rm9200dk
u-boot-1.1.2 ------------ - running in ram : OK - stored in flash with boot.bin as pre-loader and then u-boot as bootloader : OK - stored in flash as unique bootloader : DOES NOT BOOT
u-boot-1.1.3 ------------ - running in ram : DOES NOT BOOT - stored in flash with boot.bin as pre-loader and then u-boot as bootloader : DOES NOT BOOT - stored in flash as unique bootloader : OK BUT FAILS KERNEL UNCOMPRESSION
P.S. Looking into boot.bin sources seems that it required for Master clock, PLL frequency and SDRAM very low level settings.
Hoping this could be useful :-)
Marco Cavallini ===================================================== Koan s.a.s. - Software Engineering Linux and WinCE solutions for Embedded and Real-Time Software Klinux : the embedded distribution for industrial applications - Atmel AT91 ARM Third Party Consultant - Intel PCA Developer Network Member - Microsoft Windows Embedded Partner Via Pascoli, 3 - 24121 Bergamo - ITALIA Tel. (++39) 035-255.235 - Fax (++39) 178-223.9748 http://www.koansoftware.com - http://www.klinux.org =====================================================