From: Vinitha Pillai-B57223 vinitha.pillai@nxp.com
The header address of PPA defined in Kconfig.
Signed-off-by: Vinitha Pillai vinitha.pillai@nxp.com Signed-off-by: Sumit Garg sumit.garg@nxp.com --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 11 +++++++++++ arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 2 +- arch/arm/include/asm/fsl_secure_boot.h | 12 ++---------- 3 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index a99b1c6..10efb8c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -154,6 +154,17 @@ config SYS_LS_PPA_FW_ADDR QSPI flash, this address is a directly memory-mapped. If it is in a serial accessed flash, such as NAND and SD card, it is a byte offset. + +config SYS_LS_PPA_ESBC_ADDR + hex "hdr address of PPA firmware loading from" + depends on FSL_LS_PPA && CHAIN_OF_TRUST + default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A + help + If the PPA header firmware locate at XIP flash, such as NOR or + QSPI flash, this address is a directly memory-mapped. + If it is in a serial accessed flash, such as NAND and SD + card, it is a byte offset. + endmenu
config SYS_FSL_ERRATUM_A010315 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c index b68e87d..cb16925 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c @@ -42,7 +42,7 @@ int ppa_init(void) ppa_img_addr = (uintptr_t)ppa_fit_addr; if (fsl_check_boot_mode_secure() != 0) { ret = fsl_secboot_validate(ppa_esbc_hdr, - CONFIG_PPA_KEY_HASH, + PPA_KEY_HASH, &ppa_img_addr); if (ret != 0) printf("PPA validation failed\n"); diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index fd627c0..a1a3004 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -109,21 +109,13 @@ #endif
#ifdef CONFIG_FSL_LS_PPA -#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP -#ifdef CONFIG_LS1043A -#define CONFIG_SYS_LS_PPA_ESBC_ADDR 0x600c0000 -#endif -#else -#error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined" -#endif /* ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP */ - /* Define the key hash here if SRK used for signing PPA image is * different from SRK hash put in SFP used for U-Boot. * Example * #define CONFIG_PPA_KEY_HASH \ - * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" + * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" */ -#define CONFIG_PPA_KEY_HASH NULL +#define PPA_KEY_HASH NULL #endif /* ifdef CONFIG_FSL_LS_PPA */
#include <config_fsl_chain_trust.h>