The current define of get_bus_freq() in the CONFIG_NAND_SPL #ifdef is not used at all. This patch changes it's define to the currently used value of 133333333 and removes the unnecessary code.
Signed-off-by: Stefan Roese sr@denx.de --- board/amcc/sequoia/sdram.c | 6 +----- 1 files changed, 1 insertions(+), 5 deletions(-)
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c index c26e6ee..6df4c6d 100644 --- a/board/amcc/sequoia/sdram.c +++ b/board/amcc/sequoia/sdram.c @@ -44,7 +44,7 @@ extern void denali_core_search_data_eye(void); * for the 4k NAND boot image so define bus_frequency to 133MHz here * which is save for the refresh counter setup. */ -#define get_bus_freq(val) 133000000 +#define get_bus_freq(val) 133333333 #endif
/************************************************************************* @@ -55,11 +55,7 @@ extern void denali_core_search_data_eye(void); phys_size_t initdram (int board_type) { #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) -#if !defined(CONFIG_NAND_SPL) ulong speed = get_bus_freq(0); -#else - ulong speed = 133333333; /* 133MHz is on the safe side */ -#endif
mtsdram(DDR0_02, 0x00000000);