We don't need these checks anymore since when PCI is enabled, driver model is always used.
Drop them.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/bios_emulator/atibios.c | 98 --------------------------------- drivers/bios_emulator/bios.c | 39 ------------- include/bios_emul.h | 16 ------ 3 files changed, 153 deletions(-)
diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c index 6c7cc24cbd9..9547470a2f7 100644 --- a/drivers/bios_emulator/atibios.c +++ b/drivers/bios_emulator/atibios.c @@ -230,19 +230,12 @@ This function executes the BIOS POST code on the controller. We assume that at this stage the controller has its I/O and memory space enabled and that all other controllers are in a disabled state. ****************************************************************************/ -#ifdef CONFIG_DM_PCI static void PCI_doBIOSPOST(struct udevice *pcidev, BE_VGAInfo *vga_info, int vesa_mode, struct vbe_mode_info *mode_info) -#else -static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info, - int vesa_mode, struct vbe_mode_info *mode_info) -#endif { RMREGS regs; RMSREGS sregs; -#ifdef CONFIG_DM_PCI pci_dev_t bdf; -#endif
/* Determine the value to store in AX for BIOS POST. Per the PCI specs, AH must contain the bus and AL must contain the devfn, encoded as @@ -250,14 +243,9 @@ static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info, */ memset(®s, 0, sizeof(regs)); memset(&sregs, 0, sizeof(sregs)); -#ifdef CONFIG_DM_PCI bdf = dm_pci_get_bdf(pcidev); regs.x.ax = (int)PCI_BUS(bdf) << 8 | (int)PCI_DEV(bdf) << 3 | (int)PCI_FUNC(bdf); -#else - regs.x.ax = ((int)PCI_BUS(pcidev) << 8) | - ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev); -#endif /*Setup the X86 emulator for the VGA BIOS*/ BE_setVGA(vga_info);
@@ -300,28 +288,15 @@ NOTE: This function leaves the original memory aperture disabled by leaving it programmed to all 1's. It must be restored to the correct value later. ****************************************************************************/ -#ifdef CONFIG_DM_PCI static u32 PCI_findBIOSAddr(struct udevice *pcidev, int *bar) -#else -static u32 PCI_findBIOSAddr(pci_dev_t pcidev, int *bar) -#endif { u32 base, size;
for (*bar = 0x10; *bar <= 0x14; (*bar) += 4) { -#ifdef CONFIG_DM_PCI dm_pci_read_config32(pcidev, *bar, &base); -#else - pci_read_config_dword(pcidev, *bar, &base); -#endif if (!(base & 0x1)) { -#ifdef CONFIG_DM_PCI dm_pci_write_config32(pcidev, *bar, 0xFFFFFFFF); dm_pci_read_config32(pcidev, *bar, &size); -#else - pci_write_config_dword(pcidev, *bar, 0xFFFFFFFF); - pci_read_config_dword(pcidev, *bar, &size); -#endif size = ~(size & ~0xFF) + 1; if (size >= MAX_BIOSLEN) return base & ~0xFF; @@ -344,19 +319,11 @@ necessary). Anyway to fix this we change all I/O mapped base registers and chop off the top bits. ****************************************************************************/ -#ifdef CONFIG_DM_PCI static void PCI_fixupIObase(struct udevice *pcidev, int reg, u32 *base) -#else -static void PCI_fixupIObase(pci_dev_t pcidev, int reg, u32 * base) -#endif { if ((*base & 0x1) && (*base > 0xFFFE)) { *base &= 0xFFFF; -#ifdef CONFIG_DM_PCI dm_pci_write_config32(pcidev, reg, *base); -#else - pci_write_config_dword(pcidev, reg, *base); -#endif
} } @@ -371,30 +338,18 @@ Pointers to the mapped BIOS image REMARKS: Maps a pointer to the BIOS image on the graphics card on the PCI bus. ****************************************************************************/ -#ifdef CONFIG_DM_PCI void *PCI_mapBIOSImage(struct udevice *pcidev) -#else -void *PCI_mapBIOSImage(pci_dev_t pcidev) -#endif { u32 BIOSImageBus; int BIOSImageBAR; u8 *BIOSImage;
/*Save PCI BAR registers that might get changed*/ -#ifdef CONFIG_DM_PCI dm_pci_read_config32(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress); dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10); dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14); dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18); dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20); -#else - pci_read_config_dword(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress); - pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10); - pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14); - pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18); - pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20); -#endif
/*Fix up I/O base registers to less than 64K */ if(saveBaseAddress14 != 0) @@ -413,21 +368,12 @@ void *PCI_mapBIOSImage(pci_dev_t pcidev) return NULL; }
-#ifdef CONFIG_DM_PCI BIOSImage = dm_pci_bus_to_virt(pcidev, BIOSImageBus, PCI_REGION_MEM, 0, MAP_NOCACHE);
/*Change the PCI BAR registers to map it onto the bus.*/ dm_pci_write_config32(pcidev, BIOSImageBAR, 0); dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1); -#else - BIOSImage = pci_bus_to_virt(pcidev, BIOSImageBus, - PCI_REGION_MEM, 0, MAP_NOCACHE); - - /*Change the PCI BAR registers to map it onto the bus.*/ - pci_write_config_dword(pcidev, BIOSImageBAR, 0); - pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1); -#endif udelay(1);
/*Check that the BIOS image is valid. If not fail, or return the @@ -447,7 +393,6 @@ pcidev - PCI device info for the video card on the bus REMARKS: Unmaps the BIOS image for the device and restores framebuffer mappings ****************************************************************************/ -#ifdef CONFIG_DM_PCI void PCI_unmapBIOSImage(struct udevice *pcidev, void *BIOSImage) { dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress); @@ -456,16 +401,6 @@ void PCI_unmapBIOSImage(struct udevice *pcidev, void *BIOSImage) dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18); dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20); } -#else -void PCI_unmapBIOSImage(pci_dev_t pcidev, void *BIOSImage) -{ - pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress); - pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_0, saveBaseAddress10); - pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_1, saveBaseAddress14); - pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18); - pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20); -} -#endif
/**************************************************************************** PARAMETERS: @@ -479,22 +414,14 @@ REMARKS: Loads and POST's the display controllers BIOS, directly from the BIOS image we can extract over the PCI bus. ****************************************************************************/ -#ifdef CONFIG_DM_PCI static int PCI_postController(struct udevice *pcidev, uchar *bios_rom, int bios_len, BE_VGAInfo *vga_info, int vesa_mode, struct vbe_mode_info *mode_info) -#else -static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len, - BE_VGAInfo *vga_info, int vesa_mode, - struct vbe_mode_info *mode_info) -#endif { u32 bios_image_len; uchar *mapped_bios; uchar *copy_of_bios; -#ifdef CONFIG_DM_PCI pci_dev_t bdf; -#endif
if (bios_rom) { copy_of_bios = bios_rom; @@ -522,16 +449,10 @@ static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len, }
/*Save information in vga_info structure*/ -#ifdef CONFIG_DM_PCI bdf = dm_pci_get_bdf(pcidev); vga_info->function = PCI_FUNC(bdf); vga_info->device = PCI_DEV(bdf); vga_info->bus = PCI_BUS(bdf); -#else - vga_info->function = PCI_FUNC(pcidev); - vga_info->device = PCI_DEV(pcidev); - vga_info->bus = PCI_BUS(pcidev); -#endif vga_info->pcidev = pcidev; vga_info->BIOSImage = copy_of_bios; vga_info->BIOSImageLen = bios_image_len; @@ -549,22 +470,13 @@ static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len, return true; }
-#ifdef CONFIG_DM_PCI int biosemu_setup(struct udevice *pcidev, BE_VGAInfo **vga_infop) -#else -int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **vga_infop) -#endif { BE_VGAInfo *VGAInfo; -#ifdef CONFIG_DM_PCI pci_dev_t bdf = dm_pci_get_bdf(pcidev);
printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n", PCI_BUS(bdf), PCI_FUNC(bdf), PCI_DEV(bdf)); -#else - printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n", - PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev)); -#endif /*Initialise the x86 BIOS emulator*/ if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) { printf("videoboot: Out of memory!\n"); @@ -582,15 +494,9 @@ void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void)) X86EMU_setupIntrFunc(intnum, (X86EMU_intrFuncs)int_func); }
-#ifdef CONFIG_DM_PCI int biosemu_run(struct udevice *pcidev, uchar *bios_rom, int bios_len, BE_VGAInfo *vga_info, int clean_up, int vesa_mode, struct vbe_mode_info *mode_info) -#else -int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len, - BE_VGAInfo *vga_info, int clean_up, int vesa_mode, - struct vbe_mode_info *mode_info) -#endif { /*Post all the display controller BIOS'es*/ if (!PCI_postController(pcidev, bios_rom, bios_len, vga_info, @@ -623,12 +529,8 @@ REMARKS: Boots the PCI/AGP video card on the bus using the Video ROM BIOS image and the X86 BIOS emulator module. ****************************************************************************/ -#ifdef CONFIG_DM_PCI int BootVideoCardBIOS(struct udevice *pcidev, BE_VGAInfo **pVGAInfo, int clean_up) -#else -int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up) -#endif { BE_VGAInfo *VGAInfo; int ret; diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c index 77c7f94bc63..9596a1fdd3e 100644 --- a/drivers/bios_emulator/bios.c +++ b/drivers/bios_emulator/bios.c @@ -185,21 +185,12 @@ static void X86API int1A(int unused) case 0xB103: /* Find PCI class code */ M.x86.R_AH = DEVICE_NOT_FOUND; #ifdef __KERNEL__ -#ifdef CONFIG_DM_PCI dm_pci_read_config8(_BE_env.vgaInfo.pcidev, PCI_CLASS_PROG, &interface); dm_pci_read_config8(_BE_env.vgaInfo.pcidev, PCI_CLASS_DEVICE, &subclass); dm_pci_read_config8(_BE_env.vgaInfo.pcidev, PCI_CLASS_DEVICE + 1, &baseclass); -#else - pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_PROG, - &interface); - pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_DEVICE, - &subclass); - pci_read_config_byte(_BE_env.vgaInfo.pcidev, - PCI_CLASS_DEVICE + 1, &baseclass); -#endif if (M.x86.R_CL == interface && M.x86.R_CH == subclass && (u8) (M.x86.R_ECX >> 16) == baseclass) { #else @@ -218,13 +209,8 @@ static void X86API int1A(int unused) if (M.x86.R_BX == pciSlot) { M.x86.R_AH = SUCCESSFUL; #ifdef __KERNEL__ -# ifdef CONFIG_DM_PCI dm_pci_read_config8(_BE_env.vgaInfo.pcidev, M.x86.R_DI, &M.x86.R_CL); -# else - pci_read_config_byte(_BE_env.vgaInfo.pcidev, M.x86.R_DI, - &M.x86.R_CL); -# endif #else M.x86.R_CL = (u8) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_BYTE, @@ -238,13 +224,8 @@ static void X86API int1A(int unused) if (M.x86.R_BX == pciSlot) { M.x86.R_AH = SUCCESSFUL; #ifdef __KERNEL__ -# ifdef CONFIG_DM_PCI dm_pci_read_config16(_BE_env.vgaInfo.pcidev, M.x86.R_DI, &M.x86.R_CX); -# else - pci_read_config_word(_BE_env.vgaInfo.pcidev, M.x86.R_DI, - &M.x86.R_CX); -# endif #else M.x86.R_CX = (u16) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_WORD, @@ -258,13 +239,8 @@ static void X86API int1A(int unused) if (M.x86.R_BX == pciSlot) { M.x86.R_AH = SUCCESSFUL; #ifdef __KERNEL__ -# ifdef CONFIG_DM_PCI dm_pci_read_config32(_BE_env.vgaInfo.pcidev, M.x86.R_DI, &M.x86.R_ECX); -# else - pci_read_config_dword(_BE_env.vgaInfo.pcidev, - M.x86.R_DI, &M.x86.R_ECX); -# endif #else M.x86.R_ECX = (u32) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_DWORD, @@ -278,13 +254,8 @@ static void X86API int1A(int unused) if (M.x86.R_BX == pciSlot) { M.x86.R_AH = SUCCESSFUL; #ifdef __KERNEL__ -# ifdef CONFIG_DM_PCI dm_pci_write_config8(_BE_env.vgaInfo.pcidev, M.x86.R_DI, M.x86.R_CL); -# else - pci_write_config_byte(_BE_env.vgaInfo.pcidev, - M.x86.R_DI, M.x86.R_CL); -# endif #else PCI_accessReg(M.x86.R_DI, M.x86.R_CL, PCI_WRITE_BYTE, _BE_env.vgaInfo.pciInfo); @@ -297,13 +268,8 @@ static void X86API int1A(int unused) if (M.x86.R_BX == pciSlot) { M.x86.R_AH = SUCCESSFUL; #ifdef __KERNEL__ -# ifdef CONFIG_DM_PCI dm_pci_write_config32(_BE_env.vgaInfo.pcidev, M.x86.R_DI, M.x86.R_CX); -# else - pci_write_config_word(_BE_env.vgaInfo.pcidev, - M.x86.R_DI, M.x86.R_CX); -# endif #else PCI_accessReg(M.x86.R_DI, M.x86.R_CX, PCI_WRITE_WORD, _BE_env.vgaInfo.pciInfo); @@ -316,13 +282,8 @@ static void X86API int1A(int unused) if (M.x86.R_BX == pciSlot) { M.x86.R_AH = SUCCESSFUL; #ifdef __KERNEL__ -# ifdef CONFIG_DM_PCI dm_pci_write_config32(_BE_env.vgaInfo.pcidev, M.x86.R_DI, M.x86.R_ECX); -# else - pci_write_config_dword(_BE_env.vgaInfo.pcidev, - M.x86.R_DI, M.x86.R_ECX); -# endif #else PCI_accessReg(M.x86.R_DI, M.x86.R_ECX, PCI_WRITE_DWORD, _BE_env.vgaInfo.pciInfo); diff --git a/include/bios_emul.h b/include/bios_emul.h index 158e0f223d8..72410dc7948 100644 --- a/include/bios_emul.h +++ b/include/bios_emul.h @@ -30,11 +30,7 @@ typedef struct { int bus; u32 VendorID; u32 DeviceID; -#ifdef CONFIG_DM_PCI struct udevice *pcidev; -#else - pci_dev_t pcidev; -#endif void *BIOSImage; u32 BIOSImageLen; u8 LowMem[1536]; @@ -42,12 +38,8 @@ typedef struct {
struct vbe_mode_info;
-#ifdef CONFIG_DM_PCI int BootVideoCardBIOS(struct udevice *pcidev, BE_VGAInfo **pVGAInfo, int clean_up); -#else -int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up); -#endif
/* Run a BIOS ROM natively (only supported on x86 machines) */ void bios_run_on_x86(struct udevice *dev, unsigned long addr, int vesa_mode, @@ -65,18 +57,10 @@ void bios_set_interrupt_handler(int intnum, int (*int_handler_func)(void));
void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void));
-#ifdef CONFIG_DM_PCI int biosemu_setup(struct udevice *pcidev, BE_VGAInfo **pVGAInfo);
int biosemu_run(struct udevice *dev, uchar *bios_rom, int bios_len, BE_VGAInfo *vga_info, int clean_up, int vesa_mode, struct vbe_mode_info *mode_info); -#else -int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo); - -int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len, - BE_VGAInfo *vga_info, int clean_up, int vesa_mode, - struct vbe_mode_info *mode_info); -#endif
#endif