Thank you for your help! This task might be to hard for us, so we will try to manage without interrupts.
Regards Björn & Andreas
2008/10/1 Wolfgang Denk wd@denx.de
Dear "=?ISO-8859-1?Q?Bj=F6rn_Sal=E4ng?=",
In message aa37bd180810010632r113b3d48lda818664b1e84357@mail.gmail.com you wrote:
Hi again! Thank You Wolfgang for spending time on us.
YOu are welcome - but please keep the list on Cc: !
So you are proposing we should rebuild U-boot and upload it on our board?
To
No - that will probably not be sufficient. You have to add the code first that implements interrupt support, it seems.
much about it. We hoped we only needed to change the binary file of our standalone program compiled on our host computer. Change U-boot or standalone binary?
Extend the U-Boot code to add interrupt support, then rebuild and install the new U-Boot.
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de "There are three principal ways to lose money: wine, women, and engi- neers. While the first two are more pleasant, the third is by far the more certain." - Baron Rothschild, ca. 1800