+Tom
On 08/01/20 6:44 am, Peng Fan wrote:
Subject: Re: [PATCH 0/8] Add Support for MMC/SD in J721e
Hi,
On 19/11/19 1:49 pm, Faiz Abbas wrote:
The following patches add support for MMC/SD in J721e. Currently, SD card is capped at 25 MBps and eMMC is capped at 50 MBps. Support for higher speeds and eMMC boot support will be added in futures series.
Faiz Abbas (8): mmc: am654_sdhci: Get Xin clock by name mmc: am654_sdhci: Add Support for configuring PHY in J721e arm: dts: k3-j721e-common-proc-board: Remove voltage-ranges from
sdhci
nodesarm: dts: k3-j721e-common-proc-board: Add pinmux for SD card configs: j721e_evm: Add configs for ADMA Support configs: j721e_evm_a72: Enable FAT_WRITE configs: j721e_evm_a72: Add Support for GPT partitions configs: j721e_evm_r5: Add configs for environment in eMMC
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 3 +- .../k3-j721e-common-proc-board-u-boot.dtsi | 4 + arch/arm/dts/k3-j721e-common-proc-board.dts | 22 ++- .../arm/dts/k3-j721e-r5-common-proc-board.dts | 16 +++ configs/j721e_evm_a72_defconfig | 7 + configs/j721e_evm_r5_defconfig | 1 + drivers/mmc/am654_sdhci.c | 129
++++++++++++++----
include/configs/j721e_evm.h | 15 ++ 8 files changed, 163 insertions(+), 34 deletions(-)
Can this series be picked up?
This patchset is not in my patchwork. TI maintainers might help.
Regards, Peng.
Thanks, Faiz