Re: [U-Boot] [PATCHv2] socfpga: initialize designware ethernet

On Sunday, July 13, 2014 at 10:06:50 AM, Pavel Machek wrote: [...]

@@ -14,3 +16,19 @@ int dram_init(void) gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; }

+/*

• • DesignWare Ethernet initialization
• */

+/* We know all the init functions have been run now */ +int board_eth_init(bd_t *bis)

This would be cpu_eth_init()

+{ +#if !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) && !defined(CONFIG_SPL_BUILD)

•   /* initialize and register the emac */
  

• return designware_initialize(CONFIG_EMAC_BASE,

• 		     CONFIG_PHY_INTERFACE_MODE);
  

+#else

• return 0;

+#endif +}

[...] Best regards, Marek Vasut