
- USB Ohci support
Regards, TsiChung Liew
Signed-off by: TsiChung LiewTsi-Chung.Liew@freescale.com
diff -rupN u-boot-all.git/cpu/mpc8220/usb_ohci.c u-boot-all-8220- usbh/cpu/mpc8220/usb_ohci.c --- u-boot-all.git/cpu/mpc8220/usb_ohci.c 1969-12-31 18:00:00.000000000 -0600 +++ u-boot-all-8220-usbh/cpu/mpc8220/usb_ohci.c 2007-05-10 17:27:57.000000000 -0500 @@ -0,0 +1,1658 @@ +/* + * URB OHCI HCD (Host Controller Driver) for USB on the MPC8220. + * + * (C) Copyright 2003-2004 + * Gary Jennejohn, DENX Software Engineering gj@denx.de + * + * (C) Copyright 2004 + * Pierre Aubert, Staubli Faverges p.aubert@staubli.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Note: Part of this code has been derived from linux + * + */ +/* + * IMPORTANT NOTES + * 1 - this driver is intended for use with USB Mass Storage Devices + * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes! + */ + +#include <common.h> + +#ifdef CONFIG_USB_OHCI + +#include <malloc.h> +#include <usb.h> +#include "usb_ohci.h" + +#include <mpc8220.h> + +#define OHCI_USE_NPS /* force NoPowerSwitching mode */ +#undef OHCI_VERBOSE_DEBUG /* not always helpful */ +#undef DEBUG +#undef SHOW_INFO +#undef OHCI_FILL_TRACE + +/* For initializing controller (mask in an HCFS mode too) */ +#define OHCI_CONTROL_INIT \ + (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE + +#define readl(a) (*((vu_long *)(a))) +#define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a)) + +#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; }) + +#ifdef DEBUG +#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg) +#else +#define dbg(format, arg...) do {} while(0) +#endif /* DEBUG */ +#define err(format, arg...) printf("ERROR: " format "\n", ## arg) +#ifdef SHOW_INFO +#define info(format, arg...) printf("INFO: " format "\n", ## arg) +#else +#define info(format, arg...) do {} while(0) +#endif + +#define m16_swap(x) swap_16(x) +#define m32_swap(x) swap_32(x) + +#define ohci_cpu_to_le16(x) (x) +#define ohci_cpu_to_le32(x) (x) + +/* global ohci_t */ +static ohci_t gohci; +/* this must be aligned to a 256 byte boundary */ +struct ohci_hcca ghcca[1]; +/* a pointer to the aligned storage */ +struct ohci_hcca *phcca; +/* this allocates EDs for all possible endpoints */ +struct ohci_device ohci_dev; +/* urb_priv */ +urb_priv_t urb_priv; +/* RHSC flag */ +int got_rhsc; +/* device which was disconnected */ +struct usb_device *devgone; + +/*-------------------------------------------------------------------------*/ + +/* AMD-756 (D2 rev) reports corrupt register contents in some cases. + * The erratum (#4) description is incorrect. AMD's workaround waits + * till some bits (mostly reserved) are clear; ok for all revs. + */ +#define OHCI_QUIRK_AMD756 0xabcd +#define read_roothub(hc, register, mask) ({ \ + u32 temp = readl (&hc->regs->roothub.register); \ + if (hc->flags & OHCI_QUIRK_AMD756) \ + while (temp & mask) \ + temp = readl (&hc->regs->roothub.register); \ + temp; }) + +static u32 roothub_a(struct ohci *hc) +{ + return read_roothub(hc, a, 0xfc0fe000); +} +static inline u32 roothub_b(struct ohci *hc) +{ + return readl(&hc->regs->roothub.b); +} +static inline u32 roothub_status(struct ohci *hc) +{ + return readl(&hc->regs->roothub.status); +} +static u32 roothub_portstatus(struct ohci *hc, int i) +{ + return read_roothub(hc, portstatus[i], 0xffe0fce0); +} + +/* forward declaration */ +static int hc_interrupt(void); +static void +td_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup, urb_priv_t * urb, + int interval); + +/*-------------------------------------------------------------------------* + * URB support functions + *-------------------------------------------------------------------------*/ + +/* free HCD-private data associated with this URB */ + +static void urb_free_priv(urb_priv_t * urb) +{ + int i; + int last; + struct td *td; + + last = urb->length - 1; + if (last >= 0) { + for (i = 0; i <= last; i++) { + td = urb->td[i]; + if (td) { + td->usb_dev = NULL; + urb->td[i] = NULL; + } + } + } +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +static int sohci_get_current_frame_number(struct usb_device *dev); + +/* debug| print the main components of an URB + * small: 0) header + data packets 1) just header */ + +static void pkt_print(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup, char *str, + int small) +{ + urb_priv_t *purb = &urb_priv; + + dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx", + str, + sohci_get_current_frame_number(dev), + usb_pipedevice(pipe), + usb_pipeendpoint(pipe), + usb_pipeout(pipe) ? 'O' : 'I', + usb_pipetype(pipe) < 2 ? (usb_pipeint(pipe) ? "INTR" : "ISOC") : + (usb_pipecontrol(pipe) ? "CTRL" : "BULK"), + purb->actual_length, + transfer_len, + dev->status); +#ifdef OHCI_VERBOSE_DEBUG + if (!small) { + int i, len; + + if (usb_pipecontrol(pipe)) { + printf(__FILE__ ": cmd(8):"); + for (i = 0; i < 8; i++) + printf(" %02x", ((__u8 *) setup)[i]); + printf("\n"); + } + if (transfer_len > 0 && buffer) { + printf(__FILE__ ": data(%d/%d):", + purb->actual_length, transfer_len); + len = usb_pipeout(pipe) ? + transfer_len : purb->actual_length; + for (i = 0; i < 16 && i < len; i++) + printf(" %02x", ((__u8 *) buffer)[i]); + printf("%s\n", i < len ? "..." : ""); + } + } +#endif +} + +/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/ +void ep_print_int_eds(ohci_t * ohci, char *str) +{ + int i, j; + __u32 *ed_p; + for (i = 0; i < 32; i++) { + j = 5; + ed_p = &(ohci->hcca->int_table[i]); + if (*ed_p == 0) + continue; + printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i); + while (*ed_p != 0 && j--) { + ed_t *ed = (ed_t *) ohci_cpu_to_le32(ed_p); + printf(" ed: %4x;", ed->hwINFO); + ed_p = &ed->hwNextED; + } + printf("\n"); + } +} + +static void ohci_dump_intr_mask(char *label, __u32 mask) +{ + dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s", + label, + mask, + (mask & OHCI_INTR_MIE) ? " MIE" : "", + (mask & OHCI_INTR_OC) ? " OC" : "", + (mask & OHCI_INTR_RHSC) ? " RHSC" : "", + (mask & OHCI_INTR_FNO) ? " FNO" : "", + (mask & OHCI_INTR_UE) ? " UE" : "", + (mask & OHCI_INTR_RD) ? " RD" : "", + (mask & OHCI_INTR_SF) ? " SF" : "", + (mask & OHCI_INTR_WDH) ? " WDH" : "", + (mask & OHCI_INTR_SO) ? " SO" : ""); +} + +static void maybe_print_eds(char *label, __u32 value) +{ + ed_t *edp = (ed_t *) value; + + if (value) { + dbg("%s %08x", label, value); + dbg("%08x", edp->hwINFO); + dbg("%08x", edp->hwTailP); + dbg("%08x", edp->hwHeadP); + dbg("%08x", edp->hwNextED); + } +} + +static char *hcfs2string(int state) +{ + switch (state) { + case OHCI_USB_RESET: + return "reset"; + case OHCI_USB_RESUME: + return "resume"; + case OHCI_USB_OPER: + return "operational"; + case OHCI_USB_SUSPEND: + return "suspend"; + } + return "?"; +} + +/* dump control and status registers */ +static void ohci_dump_status(ohci_t * controller) +{ + struct ohci_regs *regs = controller->regs; + __u32 temp; + + temp = readl(®s->revision) & 0xff; + if (temp != 0x10) + dbg("spec %d.%d", (temp >> 4), (temp & 0x0f)); + + temp = readl(®s->control); + dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp, + (temp & OHCI_CTRL_RWE) ? " RWE" : "", + (temp & OHCI_CTRL_RWC) ? " RWC" : "", + (temp & OHCI_CTRL_IR) ? " IR" : "", + hcfs2string(temp & OHCI_CTRL_HCFS), + (temp & OHCI_CTRL_BLE) ? " BLE" : "", + (temp & OHCI_CTRL_CLE) ? " CLE" : "", + (temp & OHCI_CTRL_IE) ? " IE" : "", + (temp & OHCI_CTRL_PLE) ? " PLE" : "", + temp & OHCI_CTRL_CBSR); + + temp = readl(®s->cmdstatus); + dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp, + (temp & OHCI_SOC) >> 16, + (temp & OHCI_OCR) ? " OCR" : "", + (temp & OHCI_BLF) ? " BLF" : "", + (temp & OHCI_CLF) ? " CLF" : "", + (temp & OHCI_HCR) ? " HCR" : ""); + + ohci_dump_intr_mask("intrstatus", readl(®s->intrstatus)); + ohci_dump_intr_mask("intrenable", readl(®s->intrenable)); + + maybe_print_eds("ed_periodcurrent", readl(®s->ed_periodcurrent)); + + maybe_print_eds("ed_controlhead", readl(®s->ed_controlhead)); + maybe_print_eds("ed_controlcurrent", readl(®s->ed_controlcurrent)); + + maybe_print_eds("ed_bulkhead", readl(®s->ed_bulkhead)); + maybe_print_eds("ed_bulkcurrent", readl(®s->ed_bulkcurrent)); + + maybe_print_eds("donehead", readl(®s->donehead)); +} + +static void ohci_dump_roothub(ohci_t * controller, int verbose) +{ + __u32 temp, ndp, i; + + temp = roothub_a(controller); + ndp = (temp & RH_A_NDP); + + if (verbose) { + dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp, + ((temp & RH_A_POTPGT) >> 24) & 0xff, + (temp & RH_A_NOCP) ? " NOCP" : "", + (temp & RH_A_OCPM) ? " OCPM" : "", + (temp & RH_A_DT) ? " DT" : "", + (temp & RH_A_NPS) ? " NPS" : "", + (temp & RH_A_PSM) ? " PSM" : "", + ndp); + temp = roothub_b(controller); + dbg("roothub.b: %08x PPCM=%04x DR=%04x", + temp, (temp & RH_B_PPCM) >> 16, (temp & RH_B_DR) + ); + temp = roothub_status(controller); + dbg("roothub.status: %08x%s%s%s%s%s%s", + temp, + (temp & RH_HS_CRWE) ? " CRWE" : "", + (temp & RH_HS_OCIC) ? " OCIC" : "", + (temp & RH_HS_LPSC) ? " LPSC" : "", + (temp & RH_HS_DRWE) ? " DRWE" : "", + (temp & RH_HS_OCI) ? " OCI" : "", + (temp & RH_HS_LPS) ? " LPS" : ""); + } + + for (i = 0; i < ndp; i++) { + temp = roothub_portstatus(controller, i); + dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s", + i, + temp, + (temp & RH_PS_PRSC) ? " PRSC" : "", + (temp & RH_PS_OCIC) ? " OCIC" : "", + (temp & RH_PS_PSSC) ? " PSSC" : "", + (temp & RH_PS_PESC) ? " PESC" : "", + (temp & RH_PS_CSC) ? " CSC" : "", + (temp & RH_PS_LSDA) ? " LSDA" : "", + (temp & RH_PS_PPS) ? " PPS" : "", + (temp & RH_PS_PRS) ? " PRS" : "", + (temp & RH_PS_POCI) ? " POCI" : "", + (temp & RH_PS_PSS) ? " PSS" : "", + (temp & RH_PS_PES) ? " PES" : "", + (temp & RH_PS_CCS) ? " CCS" : ""); + } +} + +static void ohci_dump(ohci_t * controller, int verbose) +{ + dbg("OHCI controller usb-%s state", controller->slot_name); + + /* dumps some of the state we know about */ + ohci_dump_status(controller); + if (verbose) + ep_print_int_eds(controller, "hcca"); + dbg("hcca frame #%04x", controller->hcca->frame_no); + ohci_dump_roothub(controller, 1); +} + +#endif /* DEBUG */ + +/*-------------------------------------------------------------------------* + * Interface functions (URB) + *-------------------------------------------------------------------------*/ + +/* get a transfer request */ + +int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer, + int transfer_len, struct devrequest *setup, int interval) +{ + ohci_t *ohci; + ed_t *ed; + urb_priv_t *purb_priv; + int i, size = 0; + + ohci = &gohci; + + /* when controller's hung, permit only roothub cleanup attempts + * such as powering down ports */ + if (ohci->disabled) { + err("sohci_submit_job: EPIPE"); + return -1; + } + + /* every endpoint has a ed, locate and fill it */ + if (!(ed = ep_add_ed(dev, pipe))) { + err("sohci_submit_job: ENOMEM"); + return -1; + } + + /* for the private part of the URB we need the number of TDs (size) */ + switch (usb_pipetype(pipe)) { + case PIPE_BULK: /* one TD for every 4096 Byte */ + size = (transfer_len - 1) / 4096 + 1; + break; + case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */ + size = (transfer_len == 0) ? 2 : (transfer_len - 1) / 4096 + 3; + break; + } + + if (size >= (N_URB_TD - 1)) { + err("need %d TDs, only have %d", size, N_URB_TD); + return -1; + } + purb_priv = &urb_priv; + purb_priv->pipe = pipe; + + /* fill the private part of the URB */ + purb_priv->length = size; + purb_priv->ed = ed; + purb_priv->actual_length = 0; + + /* allocate the TDs */ + /* note that td[0] was allocated in ep_add_ed */ + for (i = 0; i < size; i++) { + purb_priv->td[i] = td_alloc(dev); + if (!purb_priv->td[i]) { + purb_priv->length = i; + urb_free_priv(purb_priv); + err("sohci_submit_job: ENOMEM"); + return -1; + } + } + + if (ed->state == ED_NEW || (ed->state & ED_DEL)) { + urb_free_priv(purb_priv); + err("sohci_submit_job: EINVAL"); + return -1; + } + + /* link the ed into a chain if is not already */ + if (ed->state != ED_OPER) + ep_link(ohci, ed); + + /* fill the TDs and link it to the ed */ + td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, + interval); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +/* tell us the current USB frame number */ + +static int sohci_get_current_frame_number(struct usb_device *usb_dev) +{ + ohci_t *ohci = &gohci; + + return ohci_cpu_to_le16(ohci->hcca->frame_no); +} +#endif + +/*-------------------------------------------------------------------------* + * ED handling functions + *-------------------------------------------------------------------------*/ + +/* link an ed into one of the HC chains */ + +static int ep_link(ohci_t * ohci, ed_t * edi) +{ + volatile ed_t *ed = edi; + + ed->state = ED_OPER; + + switch (ed->type) { + case PIPE_CONTROL: + ed->hwNextED = 0; + if (ohci->ed_controltail == NULL) { + writel(ed, &ohci->regs->ed_controlhead); + } else { + ohci->ed_controltail->hwNextED = + ohci_cpu_to_le32((unsigned long)ed); + } + ed->ed_prev = ohci->ed_controltail; + if (!ohci->ed_controltail && !ohci->ed_rm_list[0] && + !ohci->ed_rm_list[1] && !ohci->sleeping) { + ohci->hc_control |= OHCI_CTRL_CLE; + writel(ohci->hc_control, &ohci->regs->control); + } + ohci->ed_controltail = edi; + break; + + case PIPE_BULK: + ed->hwNextED = 0; + if (ohci->ed_bulktail == NULL) { + writel(ed, &ohci->regs->ed_bulkhead); + } else { + ohci->ed_bulktail->hwNextED = + ohci_cpu_to_le32((unsigned long)ed); + } + ed->ed_prev = ohci->ed_bulktail; + if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] && + !ohci->ed_rm_list[1] && !ohci->sleeping) { + ohci->hc_control |= OHCI_CTRL_BLE; + writel(ohci->hc_control, &ohci->regs->control); + } + ohci->ed_bulktail = edi; + break; + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* unlink an ed from one of the HC chains. + * just the link to the ed is unlinked. + * the link from the ed still points to another operational ed or 0 + * so the HC can eventually finish the processing of the unlinked ed */ + +static int ep_unlink(ohci_t * ohci, ed_t * edi) +{ + volatile ed_t *ed = edi; + + ed->hwINFO |= ohci_cpu_to_le32(OHCI_ED_SKIP); + + switch (ed->type) { + case PIPE_CONTROL: + if (ed->ed_prev == NULL) { + if (!ed->hwNextED) { + ohci->hc_control &= ~OHCI_CTRL_CLE; + writel(ohci->hc_control, &ohci->regs->control); + } + writel(ohci_cpu_to_le32(*((__u32 *) & ed->hwNextED)), + &ohci->regs->ed_controlhead); + } else { + ed->ed_prev->hwNextED = ed->hwNextED; + } + if (ohci->ed_controltail == ed) { + ohci->ed_controltail = ed->ed_prev; + } else { + ((ed_t *) + ohci_cpu_to_le32(*((__u32 *) & ed->hwNextED)))-> + ed_prev = ed->ed_prev; + } + break; + + case PIPE_BULK: + if (ed->ed_prev == NULL) { + if (!ed->hwNextED) { + ohci->hc_control &= ~OHCI_CTRL_BLE; + writel(ohci->hc_control, &ohci->regs->control); + } + writel(ohci_cpu_to_le32(*((__u32 *) & ed->hwNextED)), + &ohci->regs->ed_bulkhead); + } else { + ed->ed_prev->hwNextED = ed->hwNextED; + } + if (ohci->ed_bulktail == ed) { + ohci->ed_bulktail = ed->ed_prev; + } else { + ((ed_t *) + ohci_cpu_to_le32(*((__u32 *) & ed->hwNextED)))-> + ed_prev = ed->ed_prev; + } + break; + } + ed->state = ED_UNLINK; + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* add/reinit an endpoint; this should be done once at the usb_set_configuration command, + * but the USB stack is a little bit stateless so we do it at every transaction + * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK + * in all other cases the state is left unchanged + * the ed info fields are setted anyway even though most of them should not change */ + +static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe) +{ + td_t *td; + ed_t *ed_ret; + volatile ed_t *ed; + + ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) | + (usb_pipecontrol(pipe) ? 0 : + usb_pipeout(pipe))]; + + if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) { + err("ep_add_ed: pending delete"); + /* pending delete request */ + return NULL; + } + + if (ed->state == ED_NEW) { + ed->hwINFO = ohci_cpu_to_le32(OHCI_ED_SKIP); /* skip ed */ + /* dummy td; end of td list for ed */ + td = td_alloc(usb_dev); + ed->hwTailP = ohci_cpu_to_le32((unsigned long)td); + ed->hwHeadP = ed->hwTailP; + ed->state = ED_UNLINK; + ed->type = usb_pipetype(pipe); + ohci_dev.ed_cnt++; + } + + ed->hwINFO = ohci_cpu_to_le32(usb_pipedevice(pipe) + | usb_pipeendpoint(pipe) << 7 + | (usb_pipeisoc(pipe) ? 0x8000 : 0) + | (usb_pipecontrol(pipe) ? 0 + : (usb_pipeout(pipe) ? 0x800 : 0x1000)) + | usb_pipeslow(pipe) << 13 | + usb_maxpacket(usb_dev, pipe) << 16); + + return ed_ret; +} + +/*-------------------------------------------------------------------------* + * TD handling functions + *-------------------------------------------------------------------------*/ + +/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ + +static void td_fill(ohci_t * ohci, unsigned int info, + void *data, int len, + struct usb_device *dev, int index, urb_priv_t * urb_priv) +{ + volatile td_t *td, *td_pt; +#ifdef OHCI_FILL_TRACE + int i; +#endif + + if (index > urb_priv->length) { + err("index > length"); + return; + } + /* use this td as the next dummy */ + td_pt = urb_priv->td[index]; + td_pt->hwNextTD = 0; + + /* fill the old dummy TD */ + td = urb_priv->td[index] = + (td_t *) (ohci_cpu_to_le32(urb_priv->ed->hwTailP) & ~0xf); + + td->ed = urb_priv->ed; + td->next_dl_td = NULL; + td->index = index; + td->data = (__u32) data; +#ifdef OHCI_FILL_TRACE + if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) + && usb_pipeout(urb_priv->pipe)) { + for (i = 0; i < len; i++) + printf("td->data[%d] %#2x ", i, + ((unsigned char *)td->data)[i]); + printf("\n"); + } +#endif + if (!len) + data = 0; + + td->hwINFO = ohci_cpu_to_le32(info); + td->hwCBP = ohci_cpu_to_le32((unsigned long)data); + if (data) + td->hwBE = ohci_cpu_to_le32((unsigned long)(data + len - 1)); + else + td->hwBE = 0; + td->hwNextTD = ohci_cpu_to_le32((unsigned long)td_pt); + td->hwPSW[0] = ohci_cpu_to_le16(((__u32) data & 0x0FFF) | 0xE000); + + /* append to queue */ + td->ed->hwTailP = td->hwNextTD; +} + +/*-------------------------------------------------------------------------*/ + +/* prepare all TDs of a transfer */ + +static void td_submit_job(struct usb_device *dev, unsigned long pipe, + void *buffer, int transfer_len, + struct devrequest *setup, urb_priv_t * urb, + int interval) +{ + ohci_t *ohci = &gohci; + int data_len = transfer_len; + void *data; + int cnt = 0; + __u32 info = 0; + unsigned int toggle = 0; + + /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */ + if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) { + toggle = TD_T_TOGGLE; + } else { + toggle = TD_T_DATA0; + usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), + 1); + } + urb->td_cnt = 0; + if (data_len) + data = buffer; + else + data = 0; + + switch (usb_pipetype(pipe)) { + case PIPE_BULK: + info = usb_pipeout(pipe) ? TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN; + while (data_len > 4096) { + td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data, + 4096, dev, cnt, urb); + data += 4096; + data_len -= 4096; + cnt++; + } + info = usb_pipeout(pipe) ? + TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN; + td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data, + data_len, dev, cnt, urb); + cnt++; + + if (!ohci->sleeping) + writel(OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */ + break; + + case PIPE_CONTROL: + info = TD_CC | TD_DP_SETUP | TD_T_DATA0; + td_fill(ohci, info, setup, 8, dev, cnt++, urb); + if (data_len > 0) { + info = usb_pipeout(pipe) ? + TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R + | TD_DP_IN | TD_T_DATA1; + /* NOTE: mishandles transfers >8K, some >4K */ + td_fill(ohci, info, data, data_len, dev, cnt++, urb); + } + info = usb_pipeout(pipe) ? + TD_CC | TD_DP_IN | TD_T_DATA1 : TD_CC | TD_DP_OUT | + TD_T_DATA1; + td_fill(ohci, info, data, 0, dev, cnt++, urb); + if (!ohci->sleeping) + writel(OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */ + break; + } + if (urb->length != cnt) + dbg("TD LENGTH %d != CNT %d", urb->length, cnt); +} + +/*-------------------------------------------------------------------------* + * Done List handling functions + *-------------------------------------------------------------------------*/ + +/* calculate the transfer length and update the urb */ + +static void dl_transfer_length(td_t * td) +{ + __u32 tdINFO, tdBE, tdCBP; + urb_priv_t *lurb_priv = &urb_priv; + + tdINFO = ohci_cpu_to_le32(td->hwINFO); + tdBE = ohci_cpu_to_le32(td->hwBE); + tdCBP = ohci_cpu_to_le32(td->hwCBP); + + if (!(usb_pipetype(lurb_priv->pipe) == PIPE_CONTROL && + ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { + if (tdBE != 0) { + if (td->hwCBP == 0) + lurb_priv->actual_length += tdBE - td->data + 1; + else + lurb_priv->actual_length += tdCBP - td->data; + } + } +} + +/*-------------------------------------------------------------------------*/ + +/* replies to the request have to be on a FIFO basis so + * we reverse the reversed done-list */ + +static td_t *dl_reverse_done_list(ohci_t * ohci) +{ + __u32 td_list_hc; + td_t *td_rev = NULL; + td_t *td_list = NULL; + urb_priv_t *lurb_priv = NULL; + + td_list_hc = ohci_cpu_to_le32(ohci->hcca->done_head) & 0xfffffff0; + ohci->hcca->done_head = 0; + + while (td_list_hc) { + td_list = (td_t *) td_list_hc; + + if (TD_CC_GET(ohci_cpu_to_le32(td_list->hwINFO))) { + lurb_priv = &urb_priv; + dbg(" USB-error/status: %x : %p", + TD_CC_GET(ohci_cpu_to_le32(td_list->hwINFO)), + td_list); + if (td_list->ed->hwHeadP & ohci_cpu_to_le32(0x1)) { + if (lurb_priv + && ((td_list->index + 1) < + lurb_priv->length)) { + td_list->ed->hwHeadP = + (lurb_priv-> + td[lurb_priv->length - + 1]-> + hwNextTD & + ohci_cpu_to_le32(0xfffffff0)) | + (td_list->ed-> + hwHeadP & ohci_cpu_to_le32(0x2)); + lurb_priv->td_cnt += + lurb_priv->length - td_list->index - + 1; + } else + td_list->ed->hwHeadP &= + ohci_cpu_to_le32(0xfffffff2); + } +#ifdef CONFIG_MPC8220 + td_list->hwNextTD = 0; +#endif + } + + td_list->next_dl_td = td_rev; + td_rev = td_list; + td_list_hc = ohci_cpu_to_le32(td_list->hwNextTD) & 0xfffffff0; + } + return td_list; +} +