This patch adds support for Odroid-XU3.
Signed-off-by: Hyungwon Hwang human.hwang@samsung.com Cc: Minkyu Kang mk7.kang@samsung.com Cc: Lukasz Majewski l.majewski@samsung.com Cc: Sjoerd Simons sjoerd.simons@collabora.co.uk Cc: Javier Martinez Canillas javier@dowhile0.org Cc: Simon Glass sjg@chromium.org --- Changes for v3: - Remove unnecessary node from DT file - Remove unnecessary features from config file - Remove unnecessary macros from board-specific header file - Fix some trivial typos in comments
Changes for v4: - Add MMC FIFO buffer's configuration to DT file - Make CONFIG_OF_CONTROL be set by the target information - Add basic document to doc/README.odroid-xu3 - Add CONFIG_CMD_EXT4 to config file - Add environment size and offset to config file - Add extra default environment to make bootable without modification - Remove unnecessary features from config file
Changes for v5: - Convert /include/ to #include in DT file
Changes for v6: - Separate out the documentation to new commit - Remove unnecessary header file inclusions from the board-specific setup file - Make the function board_clock_init be declared, only when CONFIG_BOARD_EARLY_INIT_F is defined
Changes for v7: - Remove OF_CONTROL dependency from !SPL_BUILD
Changes for v8: - Remove unnecessary properties in DT mmc node
Changes for v9: - Remove useless variables in the default environment - Replace the detailed information to the reference to the documentation
Changes for v10: - Remove the config unsets which are added to make the result image small This is needless now, because the image is not small enough even though these unsets are added. - Remove redundant DT node and properties - Remove the odroid-xu3 board file and make odroid-xu3 a variant of smdk5420
arch/arm/cpu/armv7/exynos/Kconfig | 4 +++ arch/arm/dts/Makefile | 3 +- arch/arm/dts/exynos5422-odroidxu3.dts | 45 +++++++++++++++++++++++++++++ board/samsung/smdk5420/Kconfig | 13 +++++++++ configs/odroid-xu3_defconfig | 4 +++ include/configs/odroid_xu3.h | 54 +++++++++++++++++++++++++++++++++++ 6 files changed, 122 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts create mode 100644 configs/odroid-xu3_defconfig create mode 100644 include/configs/odroid_xu3.h
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index f3eadb4..7fcb5d2 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -24,6 +24,10 @@ config TARGET_TRATS2 config TARGET_ODROID bool "Exynos4412 Odroid board"
+config TARGET_ODROID_XU3 + bool "Exynos5422 Odroid board" + select OF_CONTROL + config TARGET_ARNDALE bool "Exynos5250 Arndale board" select CPU_V7_HAS_NONSEC diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e5846ea..a811b1b 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -13,7 +13,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5420-smdk5420.dtb \ exynos5420-peach-pit.dtb \ - exynos5800-peach-pi.dtb + exynos5800-peach-pi.dtb \ + exynos5422-odroidxu3.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts new file mode 100644 index 0000000..cff32a9 --- /dev/null +++ b/arch/arm/dts/exynos5422-odroidxu3.dts @@ -0,0 +1,45 @@ +/* + * Odroid XU3 device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "exynos54xx.dtsi" + +/ { + model = "Odroid XU3 based on EXYNOS5422"; + compatible = "samsung,odroidxu3", "samsung,exynos5"; + + aliases { + serial0 = "/serial@12C00000"; + console = "/serial@12C20000"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000 + 0x80000000 0x10000000 + 0x90000000 0x10000000 + 0xa0000000 0x10000000 + 0xb0000000 0xea00000>; + }; + + serial@12C20000 { + status="okay"; + }; + + mmc@12200000 { + fifoth_val = <0x201f0020>; + }; + + mmc@12220000 { + fifoth_val = <0x201f0020>; + }; +}; diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig index e7aafe5..ff28b1d 100644 --- a/board/samsung/smdk5420/Kconfig +++ b/board/samsung/smdk5420/Kconfig @@ -1,3 +1,16 @@ +if TARGET_ODROID_XU3 + +config SYS_BOARD + default "smdk5420" + +config SYS_VENDOR + default "samsung" + +config SYS_CONFIG_NAME + default "odroid_xu3" + +endif + if TARGET_PEACH_PI
config SYS_BOARD diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig new file mode 100644 index 0000000..74aa0cf --- /dev/null +++ b/configs/odroid-xu3_defconfig @@ -0,0 +1,4 @@ +CONFIG_ARM=y +CONFIG_ARCH_EXYNOS=y +CONFIG_TARGET_ODROID_XU3=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3" diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h new file mode 100644 index 0000000..88bb98d --- /dev/null +++ b/include/configs/odroid_xu3.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * Hyungwon Hwang human.hwang@samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ODROID_XU3_H +#define __CONFIG_ODROID_XU3_H + +#include "exynos5420-common.h" + +#define CONFIG_SYS_PROMPT "ODROID-XU3 # " +#define CONFIG_IDENT_STRING " for ODROID-XU3" + +#define CONFIG_BOARD_COMMON + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x43E00000 + +/* select serial console configuration */ +#define CONFIG_SERIAL2 /* use SERIAL 2 */ + +#define TZPC_BASE_OFFSET 0x10000 + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT + +/* + * FIXME: The number of bank is actually 8. But there is no way to reserver the + * last 16 Mib in the last bank now. So I just excluded the last bank + * temporally. + */ +#define CONFIG_NR_DRAM_BANKS 7 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ + +#define CONFIG_ENV_IS_IN_MMC + +#undef CONFIG_ENV_SIZE +#undef CONFIG_ENV_OFFSET +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET (SZ_1K * 1280) /* 1.25 MiB offset */ + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) + +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" + +/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ +#undef CONFIG_EXYNOS_TMU +#undef CONFIG_TMU_CMD_DTT + +#endif /* __CONFIG_H */