From: Patrice Chotard patrice.chotard@st.com
Add support for on-chip ehci controller available on STMicrolectronics SoCs. ehci support will be then available on both type A USB 2.0 connectors.
Signed-off-by: Patrice Chotard patrice.chotard@st.com ---
v3: _ update to use new USB PHY uclass
v2: _ update error messages _ add remove callback to put core into reset
drivers/usb/host/Kconfig | 9 ++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-sti.c | 116 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 126 insertions(+) create mode 100644 drivers/usb/host/ehci-sti.c
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0bf8274..7c29bf5 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -121,6 +121,15 @@ config USB_EHCI_MSM This driver supports combination of Chipidea USB controller and Synapsys USB PHY in host mode only.
+config USB_EHCI_STI + bool "Support for STMicroelectronics on-chip EHCI USB controller" + depends on ARCH_STI + select STI_PHY_USB + default y + ---help--- + Enables support for the on-chip EHCI controller on + STMicroelectronics SoCs. + config USB_EHCI_ZYNQ bool "Support for Xilinx Zynq on-chip EHCI USB controller" depends on ARCH_ZYNQ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 58c0cf5..303aa32 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o +obj-$(CONFIG_USB_EHCI_STI) += ehci-sti.o obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o diff --git a/drivers/usb/host/ehci-sti.c b/drivers/usb/host/ehci-sti.c new file mode 100644 index 0000000..b417170 --- /dev/null +++ b/drivers/usb/host/ehci-sti.c @@ -0,0 +1,116 @@ +/* + * Copyright (c) 2017 + * Patrice Chotard patrice.chotard@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <dm.h> +#include <errno.h> +#include "ehci.h" +#include <reset-uclass.h> +#include <usb.h> +#include <usb_phy.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct sti_ehci_priv { + struct ehci_ctrl ctrl; + struct reset_ctl power_ctl; + struct reset_ctl softreset_ctl; + struct usb_phy_desc usb_phy; +}; + +static int sti_ehci_probe(struct udevice *dev) +{ + struct sti_ehci_priv *priv = dev_get_priv(dev); + struct ehci_hccr *hccr = priv->ctrl.hccr; + struct ehci_hcor *hcor; + int ret; + + hccr = (struct ehci_hccr *)dev_get_addr(dev); + + if (hccr == (void *)FDT_ADDR_T_NONE) + return -EINVAL; + + ret = reset_get_by_name(dev, "power", &priv->power_ctl); + if (ret) { + error("can't get power for %s: %d", dev->name, ret); + return ret; + } + + ret = reset_get_by_name(dev, "softreset", &priv->softreset_ctl); + if (ret) { + error("can't get soft reset for %s: %d", dev->name, ret); + return ret; + } + + ret = usb_phy_get_by_name(dev, "usb", &priv->usb_phy); + if (ret) { + error("USB PHY DT node not found for %s: %d", dev->name, ret); + return ret; + } + + ret = reset_deassert(&priv->softreset_ctl); + if (ret < 0) { + error("EHCI soft reset deassert failed: %d", ret); + return ret; + } + + ret = reset_deassert(&priv->power_ctl); + if (ret < 0) { + error("EHCI power deassert failed: %d", ret); + return ret; + } + + ret = usb_phy_init(&priv->usb_phy); + if (ret) { + error("Can't init USB PHY for %s: %d\n", dev->name, ret); + return ret; + } + + hcor = (struct ehci_hcor *)((phys_addr_t)hccr + + HC_LENGTH(ehci_readl(&(hccr)->cr_capbase))); + + return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST); +} + +static int sti_ehci_remove(struct udevice *dev) +{ + struct sti_ehci_priv *priv = dev_get_priv(dev); + int ret; + + ret = ehci_deregister(dev); + if (ret) + return ret; + + ret = reset_assert(&priv->power_ctl); + if (ret < 0) { + error("EHCI power assert failed: %d", ret); + return ret; + } + + ret = reset_assert(&priv->softreset_ctl); + if (ret < 0) + error("EHCI soft reset assert failed: %d", ret); + + return ret; +} + +static const struct udevice_id sti_usb_ids[] = { + { .compatible = "st,st-ehci-300x" }, + { } +}; + +U_BOOT_DRIVER(ehci_sti) = { + .name = "ehci_sti", + .id = UCLASS_USB, + .of_match = sti_usb_ids, + .probe = sti_ehci_probe, + .remove = sti_ehci_remove, + .ops = &ehci_usb_ops, + .priv_auto_alloc_size = sizeof(struct sti_ehci_priv), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +};