For some SPI controllers it's not possible to keep the CS active between transfers and they are limited to a known number of bytes. This splits spi_flash reads into different iterations in order to respect the SPI controller limits.
Signed-off-by: Álvaro Fernández Rojas noltari@gmail.com Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Daniel Schwierzeck daniel.schwierzeck@gmail.com --- v5: no changes v4: no changes v3: no changes v2: no changes
drivers/mtd/spi/spi_flash.c | 3 +++ include/spi.h | 3 +++ 2 files changed, 6 insertions(+)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 0034a28d5f..5ee33d8bb2 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -487,6 +487,9 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, else read_len = remain_len;
+ if (spi->max_read_size) + read_len = min(read_len, spi->max_read_size); + spi_flash_addr(read_addr, cmd);
ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len); diff --git a/include/spi.h b/include/spi.h index 8c4b882c54..d0fa5379ea 100644 --- a/include/spi.h +++ b/include/spi.h @@ -86,6 +86,8 @@ struct dm_spi_slave_platdata { * @cs: ID of the chip select connected to the slave. * @mode: SPI mode to use for this slave (see SPI mode flags) * @wordlen: Size of SPI word in number of bits + * @max_read_size: If non-zero, the maximum number of bytes which can + * be read at once. * @max_write_size: If non-zero, the maximum number of bytes which can * be written at once, excluding command bytes. * @memory_map: Address of read-only SPI flash access. @@ -102,6 +104,7 @@ struct spi_slave { #endif uint mode; unsigned int wordlen; + unsigned int max_read_size; unsigned int max_write_size; void *memory_map; u8 option;