From: Michal Simek monstr@monstr.eu
there are some long lines in config file but this patches clean a lot of coding style issues
There could be small problem with Daniel name. Please check it in merge
Signed-off-by: Michal Simek monstr@monstr.eu --- include/configs/sc520_spunk.h | 138 +++++++++++++++++++---------------------- 1 files changed, 63 insertions(+), 75 deletions(-)
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h index 051b2e0..179ecdf 100644 --- a/include/configs/sc520_spunk.h +++ b/include/configs/sc520_spunk.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * Daniel Engstrï¿œm, Omicron Ceti AB, daniel@omicron.se. * * See file CREDITS for list of people who contributed to this * project. @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -33,38 +33,36 @@ * (easy to change) */
-#define CONFIG_X86 1 /* This is a X86 CPU */ +#define CONFIG_X86 1 /* This is a X86 CPU */ #define CONFIG_SC520 1 /* Include support for AMD SC520 */
-#define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */ -#define CFG_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */ -#define CFG_SDRAM_RAS_CAS_DELAY 3 /* 3T */ +#define CFG_SDRAM_PRECHARGE_DELAY 6 /* 6T */ +#define CFG_SDRAM_REFRESH_RATE 78 /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */ +#define CFG_SDRAM_RAS_CAS_DELAY 3 /* 3T */
/* define at most one of these */ #undef CFG_SDRAM_CAS_LATENCY_2T #define CFG_SDRAM_CAS_LATENCY_3T
-#define CFG_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ -#define CFG_RESET_GENERIC 1 /* use tripple-fault to reset cpu */ -#undef CFG_RESET_SC520 /* use SC520 MMCR's to reset cpu */ -#undef CFG_TIMER_SC520 /* use SC520 swtimers */ -#define CFG_TIMER_GENERIC 1 /* use the i8254 PIT timers */ -#undef CFG_TIMER_TSC /* use the Pentium TSC timers */ +#define CFG_SC520_HIGH_SPEED 0 /* 100 or 133MHz */ +#define CFG_RESET_GENERIC 1 /* use tripple-fault to reset cpu */ +#undef CFG_RESET_SC520 /* use SC520 MMCR's to reset cpu */ +#undef CFG_TIMER_SC520 /* use SC520 swtimers */ +#define CFG_TIMER_GENERIC 1 /* use the i8254 PIT timers */ +#undef CFG_TIMER_TSC /* use the Pentium TSC timers */
-#define CFG_STACK_SIZE 0x8000 /* Size of bootloader stack */ +#define CFG_STACK_SIZE 0x8000 /* Size of bootloader stack */
-#define CONFIG_SHOW_BOOT_PROGRESS 1 -#define CONFIG_LAST_STAGE_INIT 1 +#define CONFIG_SHOW_BOOT_PROGRESS 1 +#define CONFIG_LAST_STAGE_INIT 1
/* * Size of malloc() pool */ -#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024) - +#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128 * 1024)
#define CONFIG_BAUDRATE 9600
- /* * BOOTP options */ @@ -73,7 +71,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME
- /* * Command line configuration. */ @@ -86,65 +83,57 @@ #define CONFIG_CMD_PCMCIA #define CONFIG_CMD_EEPROM
- #define CONFIG_BOOTDELAY 15 -#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 " \ - "mtdparts=phys:7936k(root),256k(uboot) " -#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf " \ - "console=ttyS0,9600 " \ - "mtdparts=phys:7808k(root),128k(env),256k(uboot);" \ - "bootp;bootm" +#define CONFIG_BOOTARGS "root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) " +#define CONFIG_BOOTCOMMAND "setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm"
#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif
- /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "boot > " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "boot > " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */ +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x01000000 /* 1 ... 16 MB in DRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_HZ 1024 /* incrementer freq: 1kHz */ +#define CFG_HZ 1024 /* incrementer freq: 1kHz */
/* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
- /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of DRAM */
/*----------------------------------------------------------------------- * FLASH and environment organization */
- -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
/* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
-#define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */ -#define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */ -#define CONFIG_DS1722 /* Dallas DS1722 SPI Temperature probe */ +#define CONFIG_SPI_EEPROM /* SPI EEPROMs such as AT25010 or AT25640 */ +#define CONFIG_MW_EEPROM /* MicroWire EEPROMS such as AT93LC46 */ +#define CONFIG_DTT_DS1722 /* Dallas DS1722 SPI Temperature probe */
/* allow to overwrite serial and ethaddr */ @@ -153,19 +142,19 @@
#if 0 /* Environment in flash */ -#define CFG_ENV_IS_IN_FLASH 1 -# define CFG_ENV_ADDR (0x387a0000) /* Addr of Environment Sector */ +# define CFG_ENV_IS_IN_FLASH 1 +# define CFG_ENV_ADDR (0x387a0000) /* Addr of Environment Sector */ # define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector (or 0x10000) */ -# define CFG_ENV_OFFSET 0 +# define CFG_ENV_OFFSET 0
#else /* Environment in EEPROM */
-# define CFG_ENV_IS_IN_EEPROM 1 +# define CFG_ENV_IS_IN_EEPROM 1 # define CONFIG_SPI -# define CONFIG_SPI_X 1 -# define CFG_ENV_SIZE 0x2000 /* Total Size of Environment EEPROM */ -# define CFG_ENV_OFFSET 0x1c00 +# define CONFIG_SPI_X 1 +# define CFG_ENV_SIZE 0x2000 /* Total Size of Environment EEPROM */ +# define CFG_ENV_OFFSET 0x1c00
#endif
@@ -190,33 +179,33 @@ /*----------------------------------------------------------------------- * Device drivers */ -#define CONFIG_NET_MULTI /* Multi ethernet cards support */ +#define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_EEPRO100 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
/************************************************************ * IDE/ATA stuff ************************************************************/ -#define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ -#define CFG_ATA_BASE_ADDR 0 +#define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ +#define CFG_ATA_BASE_ADDR 0 #define CFG_ATA_IDE0_OFFSET 0x01f0 /* ide0 offset */ #define CFG_ATA_IDE1_OFFSET 0xe000 /* ide1 offset */ -#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */ +#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */ #define CFG_ATA_REG_OFFSET 0 /* reg offset */ #define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */
-#define CFG_FIRST_PCMCIA_BUS 1 +#define CFG_FIRST_PCMCIA_BUS 1
-#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* reset for ide unsupported... */ -#undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* reset for ide unsupported... */ +#undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */
#define CONFIG_IDE_TI_CARDBUS -#define CFG_PCMCIA_CIS_WIN 0x27f00000 -#define CFG_PCMCIA_CIS_WIN_SIZE 0x00100000 -#define CFG_PCMCIA_IO_WIN 0xe000 -#define CFG_PCMCIA_IO_WIN_SIZE 16 +#define CFG_PCMCIA_CIS_WIN 0x27f00000 +#define CFG_PCMCIA_CIS_WIN_SIZE 0x00100000 +#define CFG_PCMCIA_IO_WIN 0xe000 +#define CFG_PCMCIA_IO_WIN_SIZE 16
/************************************************************ * DISK Partition support @@ -225,23 +214,22 @@ #define CONFIG_MAC_PARTITION #define CONFIG_ISO_PARTITION /* Experimental */
- /************************************************************ * RTC ***********************************************************/ #define CONFIG_RTC_MC146818 -#undef CONFIG_WATCHDOG /* watchdog disabled */ +#undef CONFIG_WATCHDOG /* watchdog disabled */
/* * PCI stuff */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_PNP /* pci plug-and-play */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW
-#define CFG_FIRST_PCI_IRQ 9 -#define CFG_SECOND_PCI_IRQ 10 -#define CFG_THIRD_PCI_IRQ 11 -#define CFG_FORTH_PCI_IRQ 12 +#define CFG_FIRST_PCI_IRQ 9 +#define CFG_SECOND_PCI_IRQ 10 +#define CFG_THIRD_PCI_IRQ 11 +#define CFG_FORTH_PCI_IRQ 12
#endif /* __CONFIG_H */