The dw_mmc driver uses printf() in various places.
These bloat the code and cause problems for SPL. Use debug() where possible and try to return a useful error code instead.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v4: - Update commit message to indicate this patch is for the dw_mmc driver
drivers/mmc/dw_mmc.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 53a8aca..8f28d7e 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -8,6 +8,7 @@
#include <bouncebuf.h> #include <common.h> +#include <errno.h> #include <malloc.h> #include <mmc.h> #include <dwmmc.h> @@ -119,7 +120,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) { if (get_timer(start) > timeout) { - printf("%s: Timeout on data busy\n", __func__); + debug("%s: Timeout on data busy\n", __func__); return TIMEOUT; } } @@ -178,7 +179,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, }
if (i == retry) { - printf("%s: Timeout.\n", __func__); + debug("%s: Timeout.\n", __func__); return TIMEOUT; }
@@ -194,8 +195,8 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, debug("%s: Response Timeout.\n", __func__); return TIMEOUT; } else if (mask & DWMCI_INTMSK_RE) { - printf("%s: Response Error.\n", __func__); - return -1; + debug("%s: Response Error.\n", __func__); + return -EIO; }
@@ -214,7 +215,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, do { mask = dwmci_readl(host, DWMCI_RINTSTS); if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) { - printf("%s: DATA ERROR!\n", __func__); + debug("%s: DATA ERROR!\n", __func__); return -1; } } while (!(mask & DWMCI_INTMSK_DTO)); @@ -251,7 +252,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) else if (host->bus_hz) sclk = host->bus_hz; else { - printf("%s: Didn't get source clock value.\n", __func__); + debug("%s: Didn't get source clock value.\n", __func__); return -EINVAL; }
@@ -270,7 +271,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) do { status = dwmci_readl(host, DWMCI_CMD); if (timeout-- < 0) { - printf("%s: Timeout!\n", __func__); + debug("%s: Timeout!\n", __func__); return -ETIMEDOUT; } } while (status & DWMCI_CMD_START); @@ -285,7 +286,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) do { status = dwmci_readl(host, DWMCI_CMD); if (timeout-- < 0) { - printf("%s: Timeout!\n", __func__); + debug("%s: Timeout!\n", __func__); return -ETIMEDOUT; } } while (status & DWMCI_CMD_START); @@ -339,8 +340,8 @@ static int dwmci_init(struct mmc *mmc) dwmci_writel(host, DWMCI_PWREN, 1);
if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) { - printf("%s[%d] Fail-reset!!\n", __func__, __LINE__); - return -1; + debug("%s[%d] Fail-reset!!\n", __func__, __LINE__); + return -EIO; }
/* Enumerate at 400KHz */