[U-Boot] [PATCH 08/25] ARM: dts: sun7i: Add mmc0 node for Primo73 tablet

Reuse mmc0 node from sun7i-a20.dtsi like other board dts files for Primo73 tablet dts file, and drop in dts mmc0 definition.

Cc: Siarhei Siamashka siarhei.siamashka@gmail.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- arch/arm/dts/sun7i-a20-primo73.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/sun7i-a20-primo73.dts b/arch/arm/dts/sun7i-a20-primo73.dts index 0658f82675..942a955309 100644 --- a/arch/arm/dts/sun7i-a20-primo73.dts +++ b/arch/arm/dts/sun7i-a20-primo73.dts @@ -62,16 +62,6 @@ };

soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <&reg_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - usbphy: phy@01c13400 { usb2_vbus-supply = <&reg_usb2_vbus>; status = "okay"; @@ -100,3 +90,13 @@ status = "okay"; }; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <&reg_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +};