Re: [PATCH] arm64: dts: zynqmp: make hw-ecc as the default ecc mode

19 Oct 2023

On 10/12/23 15:58, Michal Simek wrote:
...
From: Amit Kumar Mahapatra amit.kumar-mahapatra@amd.com
Except for Linux no other component (i.e., u-boot, fsbl or BootRom) of the
software stack supports software ecc engine. So, make hw-ecc as the default
ecc mode.
Signed-off-by: Amit Kumar Mahapatra amit.kumar-mahapatra@amd.com
Signed-off-by: Michal Simek michal.simek@amd.com

arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 6 ++----
  1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index 23a3ff2fed98..160c6c58b36d 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -141,8 +141,7 @@
   	reg = <0x0>;
   	#address-cells = <0x2>;
   	#size-cells = <0x1>;

nand-ecc-mode = "soft";


nand-ecc-algo = "bch";




nand-ecc-mode = "hw";

nand-rb = <0>;
label = "main-storage-0";
nand-ecc-step-size = <1024>;

@@ -178,8 +177,7 @@
   	reg = <0x1>;
   	#address-cells = <0x2>;
   	#size-cells = <0x1>;

nand-ecc-mode = "soft";


nand-ecc-algo = "bch";




nand-ecc-mode = "hw";

nand-rb = <0>;
label = "main-storage-1";
nand-ecc-step-size = <1024>;

Applied.
M

    