From: Igal Liberman igall@marvell.com
Currently, we don't pass id for SGMII 0/1. A bug in comphy selector configuration was found (in comphy firmware), after fixing it, SGMII0/1 have different configuration, so we need to pass the ID the firmware.
Signed-off-by: Igal Liberman igall@marvell.com Reviewed-by: Grzegorz Jaszczyk jaz@semihalf.com Signed-off-by: Stefan Roese sr@denx.de ---
drivers/phy/marvell/comphy_cp110.c | 27 +++++---------------------- 1 file changed, 5 insertions(+), 22 deletions(-)
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index 2a22a67a4656..55202888194d 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -522,7 +522,7 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, { struct comphy_map *ptr_comphy_map; void __iomem *comphy_base_addr, *hpipe_base_addr; - u32 comphy_max_count, lane, ret = 0; + u32 comphy_max_count, lane, id, ret = 0; u32 pcie_width = 0; u32 mode;
@@ -591,34 +591,17 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, break; case COMPHY_TYPE_SGMII0: case COMPHY_TYPE_SGMII1: - if (ptr_comphy_map->speed == COMPHY_SPEED_INVALID) { - debug("Warning: "); - debug("SGMII PHY speed in lane %d is invalid,", - lane); - debug(" set PHY speed to 1.25G\n"); - ptr_comphy_map->speed = COMPHY_SPEED_1_25G; - } - - /* - * UINIT_ID not relevant for SGMII0 and SGMII1 - will be - * ignored by firmware - */ - mode = COMPHY_FW_FORMAT(COMPHY_SGMII_MODE, - COMPHY_UNIT_ID0, - ptr_comphy_map->speed); - ret = comphy_smc(MV_SIP_COMPHY_POWER_ON, - ptr_chip_cfg->comphy_base_addr, lane, - mode); - break; case COMPHY_TYPE_SGMII2: + /* Calculate SGMII ID */ + id = ptr_comphy_map->type - COMPHY_TYPE_SGMII0; + if (ptr_comphy_map->speed == COMPHY_SPEED_INVALID) { debug("Warning: SGMII PHY speed in lane %d is invalid, set PHY speed to 1.25G\n", lane); ptr_comphy_map->speed = COMPHY_SPEED_1_25G; }
- mode = COMPHY_FW_FORMAT(COMPHY_SGMII_MODE, - COMPHY_UNIT_ID2, + mode = COMPHY_FW_FORMAT(COMPHY_SGMII_MODE, id, ptr_comphy_map->speed); ret = comphy_smc(MV_SIP_COMPHY_POWER_ON, ptr_chip_cfg->comphy_base_addr, lane,