Hi,
Our MPC8260 based customs board's flash configuration is as follows
Flash Bank Base Address Make Number of flashes per chip size Total size
CS0 0xFE000000 M29W040B 2 0.5MB 1MB CS1 0xFE800000 AM29LV160BB 2 2MB 4MB
My question is
1. Is is mandatory that CS0 and CS1 to be contiguous? 2. what should be the value of CFG_MAX_FLASH_BANKS? 2 or 4? 3. If for a board, CS0 has "n1" number of flash chips connected and CS1 has "n2" number of flash chips connected, then what will be the suggested structure of flash driver? I found that flash drivers for different board does not consider the number of physical flash chips present in a board. 4.Is there any reference board which has multiple flash chips connected both to CS0 and CS1?
Thanks, Batsayan Das
Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you