Add documentation for building and flashing mainline U-Boot in the IOT-GATE-iMX8 board.
Signed-off-by: Fabio Estevam festevam@denx.de --- doc/board/compulab/imx8mm-cl-iot-gate.rst | 84 +++++++++++++++++++++++ doc/board/index.rst | 1 + 2 files changed, 85 insertions(+) create mode 100644 doc/board/compulab/imx8mm-cl-iot-gate.rst
diff --git a/doc/board/compulab/imx8mm-cl-iot-gate.rst b/doc/board/compulab/imx8mm-cl-iot-gate.rst new file mode 100644 index 000000000000..b63b8d61f13f --- /dev/null +++ b/doc/board/compulab/imx8mm-cl-iot-gate.rst @@ -0,0 +1,83 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +IOT-GATE-iMX8 +============= + +U-Boot for Compulab i.MX8MM IoT Gateway board. + +Quick Start +----------- + +- Build the ARM Trusted firmware binary +- Get the DDR firmwares +- Build U-Boot +- Flash U-Boot into the eMMC + +Get and build the ARM Trusted firmware +-------------------------------------- + +Note: builddir is U-Boot build directory (source directory for in-tree builds). + +Get mainline ATF: + +.. code-block:: bash + + $ git clone https://github.com/ARM-software/arm-trusted-firmware.git + $ cd arm-trusted-firmware + $ git checkout v2.5 + +Generate the bl31.bin ATF binary: + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-poky-linux- + $ make PLAT=imx8mm IMX_BOOT_UART_BASE=0x30880000 bl31 + $ cp build/imx8mm/release/bl31.bin $(builddir) + +Get the DDR firmwares +--------------------- + +.. code-block:: bash + + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin + $ chmod +x firmware-imx-8.9.bin + $ ./firmware-imx-8.9 + $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir) + +Build U-Boot +------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-poky-linux- + $ make imx8mm-cl-iot-gate_defconfig + $ export ATF_LOAD_ADDR=0x920000 + $ make + +This will result in two binaries: flash.bin and u-boot.itb. + +Flash U-Boot into the eMMC +-------------------------- + +Make sure to have access to the IOTG-ACC-M2SD adapter to recover +the board in case something goes wrong. More details at: +https://mediawiki.compulab.com/w/index.php?title=IOT-GATE-iMX8_and_SBC-IOT-i... + +The flash.bin and u-boot.itb binaries need to be flashed into the eMMC at +offset 33K and 384K, respectively. + +These binaries can be transferred from the host PC to the board running +U-Boot via TFTP: + +.. code-block:: bash + + => mmc dev 2 + => mmc partconf 2 1 7 0 (This is only needed to be done for the first time) + + => tftp $loadaddr flash.bin + => setexpr blkcnt $filesize + 0x1ff && setexpr blkcnt $blkcnt / 0x200 + => mmc write $loadaddr 0x42 $blkcnt + + => tftp $loadaddr u-boot.itb + => setexpr blkcnt $filesize + 0x1ff && setexpr blkcnt $blkcnt / 0x200 + => mmc write $loadaddr 0x300 $blkcnt diff --git a/doc/board/index.rst b/doc/board/index.rst index 9e9097889161..5c5420f3d75a 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -11,6 +11,7 @@ Board-specific doc AndesTech/index amlogic/index atmel/index + compulab/index congatec/index coreboot/index emulation/index