Add static struct eth_ops and set ops function pointers statically. Remove setting eth_ops members dynamically.
This is a step toward converting the driver for DM.
Signed-off-by: Tomas Hlavacek tmshlvck@gmail.com --- drivers/net/dm9000x.c | 12 ++++++++---- 1 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index bd96948..f6b226c 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -623,6 +623,13 @@ dm9000_phy_write(int reg, u16 value) DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value); }
+static struct eth_ops dm9000_ops = { + .init = dm9000_init, + .send = dm9000_send, + .recv = dm9000_rx, + .halt = dm9000_halt +}; + int dm9000_initialize(bd_t *bis) { struct eth_device *dev = &(dm9000_info.netdev); @@ -630,10 +637,7 @@ int dm9000_initialize(bd_t *bis) /* Load MAC address from EEPROM */ dm9000_get_enetaddr(dev);
- dev->eo->init = dm9000_init; - dev->eo->halt = dm9000_halt; - dev->eo->send = dm9000_send; - dev->eo->recv = dm9000_rx; + dev->eo = &dm9000_ops; sprintf(dev->name, "dm9000");
eth_register(dev);