From: Jan Kiszka jan.kiszka@siemens.com
Allows run-time control over watchdog auto-start and the timeout via setting the environment variable watchdog_timeout_ms. A value of zero means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value and this to zero by default. Users can then enable the watchdog once the use and OS which picks it up during boot.
Signed-off-by: Jan Kiszka jan.kiszka@siemens.com --- configs/iot2050_pg1_defconfig | 2 ++ configs/iot2050_pg2_defconfig | 2 ++ include/configs/iot2050.h | 9 +++++++++ 3 files changed, 13 insertions(+)
diff --git a/configs/iot2050_pg1_defconfig b/configs/iot2050_pg1_defconfig index 28930aac5eb..6c6af35cdee 100644 --- a/configs/iot2050_pg1_defconfig +++ b/configs/iot2050_pg1_defconfig @@ -32,6 +32,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTSTAGE=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_SPL_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTCOMMAND="run start_watchdog; run distro_bootcmd" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_MAX_SIZE=0x58000 @@ -141,6 +142,7 @@ CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_KEYBOARD=y # CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG_AUTOSTART is not set +CONFIG_WATCHDOG_TIMEOUT_MSECS=0 CONFIG_WDT=y CONFIG_WDT_K3_RTI=y CONFIG_WDT_K3_RTI_LOAD_FW=y diff --git a/configs/iot2050_pg2_defconfig b/configs/iot2050_pg2_defconfig index c76abcca672..43410160c8a 100644 --- a/configs/iot2050_pg2_defconfig +++ b/configs/iot2050_pg2_defconfig @@ -32,6 +32,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTSTAGE=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_SPL_SHOW_BOOT_PROGRESS=y +CONFIG_BOOTCOMMAND="run start_watchdog; run distro_bootcmd" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_MAX_SIZE=0x58000 @@ -142,6 +143,7 @@ CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_KEYBOARD=y # CONFIG_WATCHDOG is not set # CONFIG_WATCHDOG_AUTOSTART is not set +CONFIG_WATCHDOG_TIMEOUT_MSECS=0 CONFIG_WDT=y CONFIG_WDT_K3_RTI=y CONFIG_WDT_K3_RTI_LOAD_FW=y diff --git a/include/configs/iot2050.h b/include/configs/iot2050.h index 7d087413362..5186dfd8ff8 100644 --- a/include/configs/iot2050.h +++ b/include/configs/iot2050.h @@ -15,6 +15,14 @@
/* SPL Loader Configuration */
+#define WATCHDOG_ENV \ + "watchdog_timeout_ms=" __stringify(CONFIG_WATCHDOG_TIMEOUT_MSECS) "\0" \ + "start_watchdog=if test ${watchdog_timeout_ms} -gt 0; then " \ + "wdt dev watchdog@40610000; " \ + "wdt start ${watchdog_timeout_ms}; " \ + "echo Watchdog started, timeout ${watchdog_timeout_ms} ms; " \ + "fi\0" + /* U-Boot general configuration */ #define EXTRA_ENV_IOT2050_BOARD_SETTINGS \ "usb_pgood_delay=900\0" @@ -43,6 +51,7 @@ #define CFG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ BOOTENV \ + WATCHDOG_ENV \ EXTRA_ENV_IOT2050_BOARD_SETTINGS
#include <configs/ti_armv7_common.h>