Simon,
-----Original Message----- From: Tom Warren Sent: Tuesday, October 30, 2012 12:24 PM To: 'Simon Glass'; U-Boot Mailing List Cc: Stephen Warren Subject: RE: [PATCH v7 0/16] tegra: Add display driver and LCD support for Seaboard
Simon,
-----Original Message----- From: Simon Glass [mailto:sjg@chromium.org] Sent: Wednesday, October 17, 2012 4:25 PM To: U-Boot Mailing List Cc: Stephen Warren; Tom Warren; Simon Glass Subject: [PATCH v7 0/16] tegra: Add display driver and LCD support for Seaboard
This series adds support for the Tegra2x's display peripheral. This supports the LCD display on Seaboard and we use this to enable console output in U- Boot on the LCD.
Applied to tegra/next and pushed to denx.de. ./MAKEALL -s tegra20 is OK, checkpatch is clean. Thanks.
I'll do some testing on my Seaboard while I run a ./MAKEALL -a arm.
The above MAKEALL build (arm) fails on the Lubbock, zipitz2, palmld and palmtc builds with the following error:
common/libcommon.o: In function `lcd_sync': /common/lcd.c:125: undefined reference to `flush_dcache_range'
These builds use the 'pxa' arm cpu type, and perhaps don't have an implementation of the dcache routines.
I'll need a fix before I can submit a pull request to Albert for this.
Note that there are a couple of other arm builds (tx25 mx31pdk) that also fail, but not due to any Tegra or LCD reason - it appears they fail in arm/master, too, so they can be ignored for now.
Thanks,
Tom
Tom
<.. snip ..>
1.7.7.3
-- nvpublic