The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance selection bit.
This issue has been reported by Michael Burkey mdburkey@gmail.com and fixed by Christoph Fritz chf.fritz@googlemail.com on Linux, from which these #define-s had been copied.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Cc: Stefano Babic sbabic@denx.de Cc: Marek Vasut marex@denx.de --- .../drivers/usb/host/ehci-mxc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c index 7c5f71c..f2642a0 100644 --- u-boot-imx-f22e4fa.orig/drivers/usb/host/ehci-mxc.c +++ u-boot-imx-f22e4fa/drivers/usb/host/ehci-mxc.c @@ -67,7 +67,7 @@ #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) #define MX35_H1_PP_BIT (1 << 18) -#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_PM_BIT (1 << 16) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5)