18 Jan
2011
18 Jan
'11
5:17 a.m.
On Jan 14, 2011, at 10:41 AM, Kumar Gala wrote:
From: Poonam Aggrwal poonam.aggrwal@freescale.com
Key Features include of the P1010:
- e500v2 core frequency operation of 500 to 800 MHz
- Power consumption less than 5.0 W at 800 MHz core speed
- Dual SATA 3 Gbps controllers with integrated PHY
- Dual PCI Express controllers
- Three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers (eTSECs)
- TCP/IP acceleration and classification capabilities
- IEEE 1588 support
- Lossless flow control
- RGMII, SGMII
- DDR3 with support for a 32-bit data interface (40 bits including ECC),
up to 800 MHz data rate 32/16-bit DDR3 memory controller
- Dedicated security engine featuring trusted boot
- TDM interface
- Dual controller area networks (FlexCAN) controller
- SD/MMC card controller supporting booting from Flash cards
- USB 2.0 host and device controller with an on-chip, high-speed PHY
- Integrated Flash controller (IFC)
- Power Management Controller (PMC)
- Four-channel, general-purpose DMA controller
- I2C controller
- Serial peripheral interface (SPI) controller with master and slave support
- System timers including a periodic interrupt timer, real-time clock,
software watchdog timer, and four general-purpose timers
- Dual DUARTs
Signed-off-by: Poonam Aggrwal poonam.aggrwal@freescale.com Signed-off-by: Dipen Dudhat dipen.dudhat@freescale.com Signed-off-by: Kumar Gala galak@kernel.crashing.org
arch/powerpc/cpu/mpc85xx/Makefile | 1 + arch/powerpc/cpu/mpc8xxx/cpu.c | 2 ++ arch/powerpc/include/asm/config.h | 6 ++++-- arch/powerpc/include/asm/processor.h | 2 ++ drivers/misc/fsl_law.c | 1 + 5 files changed, 10 insertions(+), 2 deletions(-)
applied to 85xx
- k