From: Vipul Kumar vipul.kumar@xilinx.com
This patch added support of mmio read and write commands. These commands can be used to read and write registers from the u-boot command line. It can be useful in debugging.
Signed-off-by: Vipul Kumar vipul.kumar@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com ---
board/xilinx/zynqmp/cmds.c | 48 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-)
diff --git a/board/xilinx/zynqmp/cmds.c b/board/xilinx/zynqmp/cmds.c index 1f6a5dee1ff1..f8c8674f874c 100644 --- a/board/xilinx/zynqmp/cmds.c +++ b/board/xilinx/zynqmp/cmds.c @@ -61,8 +61,51 @@ static int do_zynqmp_verify_secure(cmd_tbl_t *cmdtp, int flag, int argc, return ret; }
+static int do_zynqmp_mmio_read(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + u32 read_val, addr; + int ret; + + if (argc != cmdtp->maxargs) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[2], NULL, 16); + + ret = zynqmp_mmio_read(addr, &read_val); + if (!ret) + printf("mmio read value at 0x%x = 0x%x\n", + addr, read_val); + else + printf("Failed: mmio read\n"); + + return ret; +} + +static int do_zynqmp_mmio_write(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + u32 addr, mask, val; + int ret; + + if (argc != cmdtp->maxargs) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[2], NULL, 16); + mask = simple_strtoul(argv[3], NULL, 16); + val = simple_strtoul(argv[4], NULL, 16); + + ret = zynqmp_mmio_write(addr, mask, val); + if (ret != 0) + printf("Failed: mmio write\n"); + + return ret; +} + static cmd_tbl_t cmd_zynqmp_sub[] = { U_BOOT_CMD_MKENT(secure, 5, 0, do_zynqmp_verify_secure, "", ""), + U_BOOT_CMD_MKENT(mmio_read, 3, 0, do_zynqmp_mmio_read, "", ""), + U_BOOT_CMD_MKENT(mmio_write, 5, 0, do_zynqmp_mmio_write, "", ""), };
/** @@ -99,7 +142,10 @@ static char zynqmp_help_text[] = "secure src len [key_addr] - verifies secure images of $len bytes\n" " long at address $src. Optional key_addr\n" " can be specified if user key needs to\n" - " be used for decryption\n"; + " be used for decryption\n" + "zynqmp mmio_read address - read from address\n" + "zynqmp mmio_write address mask value - write value after masking to\n" + " address\n"; #endif
U_BOOT_CMD(