This series is a follow-up series to previous series [1] that adds support for USB 3.0 hubs.
USB 3.0 hubs have slightly different hub descriptor format, as well as different port status bit positions. These needs to be properly handled by U-Boot USB core stack codes. xHCI driver has also been updated to correctly set up context structures that are required for devices behind a 3.0 hub to work.
Besides USB 3.0 hubs support, this series also adds support for low speed/full speed devices connected behind a high speed hub with the xHC controller. It turns out the 'Transaction Translator' part in the xHC data structure is missing.
Note there is one error during testing USB keyboard when CONFIG_USB_KEYBOARD is on.
"Failed to get keyboard state from device 413c:2105"
The enumeration process did pass and the error was thrown in the USB keyboard driver. This was due to the interrupt transfer is still not supported by xHCI driver, as of today.
This series is available at u-boot-x86/xhci-working2 for testing.
[1] https://lists.denx.de/pipermail/u-boot/2017-June/296166.html
Changes in v3: - fix build warnings for non-DM configuration
Changes in v2: - update the xhci-pci driver Kconfig to make it depend on DM_USB - nuke xhci_pci_remove() altogether - trim down the ifdefs by adding usb_get_hub_device() and limit ifdefs only in that function - new patch to "remove hub_port_reset()" - squash the xchi is_root_port() changes into previous commit - change to use 'packets' in the comments - handle port number is greater than 15 in route string - fix several nits in the commit message - add a comment for 666 in TT think time
Bin Meng (15): usb: xhci-pci: Drop non-DM version of xhci-pci driver usb: xhci-pci: Clean up the driver a little bit usb: hub: Use 'struct usb_hub_device' as hub device's uclass_priv usb: hub: Remove hub_port_reset() usb: hub: Add a new API to test if a hub device is root hub usb: hub: Translate USB 3.0 hub port status into old version usb: hub: Support 'set hub depth' request for USB 3.0 hubs usb: xhci: Change xhci_setup_addressable_virt_dev() signature usb: xhci: Program 'route string' in the input slot context usb: hub: Parse and save TT details from device descriptor dm: usb: Add a new USB controller operation 'update_hub_device' usb: hub: Call usb_update_hub_device() after hub descriptor is fetched usb: xhci: Implement update_hub_device() operation usb: xhci: Correct TT_SLOT and TT_PORT macros usb: xhci: Enable TT to support LS/FS devices behind a HS hub
common/usb_hub.c | 208 ++++++++++++++++++++++++++++++++++++++---- drivers/usb/host/Kconfig | 1 + drivers/usb/host/usb-uclass.c | 13 ++- drivers/usb/host/xhci-mem.c | 52 ++++++++++- drivers/usb/host/xhci-pci.c | 73 +-------------- drivers/usb/host/xhci.c | 86 ++++++++++++----- drivers/usb/host/xhci.h | 8 +- include/usb.h | 64 +++++++++---- include/usb_defs.h | 15 +++ 9 files changed, 379 insertions(+), 141 deletions(-)