Hi all,
Gentle ping on the series.
Cheers, Quentin
On 7/22/22 12:09, Quentin Schulz wrote:
From: Quentin Schulz quentin.schulz@theobroma-systems.com
An earlier commit makes the common SPL code call regulators_enable_boot_on and regulators_enable_boot_off before iterating over possible boot media for U-Boot proper. There is therefore no need to do this in the rk3399-specific code, so let's remove it.
Cc: Quentin Schulz foss+uboot@0leil.net Tested-by: Xavier Drudis Ferran xdrudis@tinet.cat Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com
This patch depends on:
- https://urldefense.proofpoint.com/v2/url?u=https-3A__lore.kernel.org_u-2Dboo...
- https://urldefense.proofpoint.com/v2/url?u=https-3A__lore.kernel.org_u-2Dboo...
v2:
- added Tested-by,
arch/arm/mach-rockchip/rk3399/rk3399.c | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index fc1acaf4bd..94d0fa58c4 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -280,15 +280,5 @@ void spl_board_init(void) if (cru->glb_rst_st != 0) rk3399_force_power_on_reset(); }
- if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) {
/** Turning the eMMC and SPI back on (if disabled via the Qseven* BIOS_ENABLE) signal is done through a always-on regulator).*/if (regulators_enable_boot_on(false))debug("%s: Cannot enable boot on regulator\n",__func__);- } } #endif