Remove statements of Xilinx Only from the fpga command information and ensure Kconfig dependencies to FPGA_XILINX are implemented instead.
Signed-off-by: Ibai Erkiaga ibai.erkiaga-elorza@amd.com ---
(no changes since v1)
Due to an issue with patman I had to add an empty line on the CONFIG_FPGA_LOADB description ---
--- cmd/Kconfig | 32 ++++++++++++++++++++------------ cmd/fpga.c | 9 ++++----- 2 files changed, 24 insertions(+), 17 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig index 1d7ddb4ed36..31f1df2a67d 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1163,16 +1163,31 @@ config CMD_FPGA help FPGA support.
-config CMD_FPGA_LOADBP - bool "fpga loadbp - load partial bitstream (Xilinx only)" +config CMD_FPGA_LOADB + bool "fpga loadb - load bitstream" + depends on CMD_FPGA && FPGA_XILINX + help + Supports loading an FPGA device from a bitstream buffer + . + + +config CMD_FPGA_LOADP + bool "fpga loadp - load partial bitstream" depends on CMD_FPGA help Supports loading an FPGA device from a bitstream buffer containing a partial bitstream.
+config CMD_FPGA_LOADBP + bool "fpga loadbp - load partial bitstream" + depends on CMD_FPGA && FPGA_XILINX + help + Supports loading an FPGA device from a bitstream buffer containing + a partial bitstream. + config CMD_FPGA_LOADFS - bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)" - depends on CMD_FPGA + bool "fpga loadfs - load bitstream from FAT filesystem" + depends on CMD_FPGA && FPGA_XILINX help Supports loading an FPGA device from a FAT filesystem.
@@ -1182,16 +1197,9 @@ config CMD_FPGA_LOADMK help Supports loading an FPGA device from a image generated by mkimage.
-config CMD_FPGA_LOADP - bool "fpga loadp - load partial bitstream" - depends on CMD_FPGA - help - Supports loading an FPGA device from a bitstream buffer containing - a partial bitstream. - config CMD_FPGA_LOAD_SECURE bool "fpga loads - loads secure bitstreams" - depends on CMD_FPGA + depends on CMD_FPGA && FPGA_XILINX select FPGA_LOAD_SECURE help Enables the fpga loads command which is used to load secure diff --git a/cmd/fpga.c b/cmd/fpga.c index 91ccbee0fef..f46ca040d28 100644 --- a/cmd/fpga.c +++ b/cmd/fpga.c @@ -412,19 +412,18 @@ U_BOOT_CMD(fpga, 6, 1, do_fpga_wrapper, "info [dev] List known device information\n" "fpga dump <dev> <address> <size> Load device to memory buffer\n" "fpga load <dev> <address> <size> Load device from memory buffer\n" + "fpga loadb <dev> <address> <size> Load device from bitstream buffer\n" #if defined(CONFIG_CMD_FPGA_LOADP) "fpga loadp <dev> <address> <size> Load device from memory buffer\n" " with partial bitstream\n" #endif - "fpga loadb <dev> <address> <size> Load device from bitstream buffer\n" - " (Xilinx only)\n" #if defined(CONFIG_CMD_FPGA_LOADBP) "fpga loadbp <dev> <address> <size> Load device from bitstream buffer\n" - " with partial bitstream (Xilinx only)\n" + " with partial bitstream\n" #endif #if defined(CONFIG_CMD_FPGA_LOADFS) "fpga loadfs <dev> <address> <size> <blocksize> <interface> [<dev[:part]>] <filename>\n" - " Load device from filesystem (FAT by default) (Xilinx only)\n" + " Load device from filesystem (FAT by default)\n" #endif #if defined(CONFIG_CMD_FPGA_LOADMK) "fpga loadmk <dev> <address> Load device generated with mkimage\n" @@ -436,7 +435,7 @@ U_BOOT_CMD(fpga, 6, 1, do_fpga_wrapper, #if defined(CONFIG_CMD_FPGA_LOAD_SECURE) "fpga loads <dev> <address> <size> <authflag> <encflag> [Userkey address]\n" " Load device from memory buffer with secure bistream\n" - " (authenticated/encrypted/both)(Xilinx only)\n" + " (authenticated/encrypted/both)\n" " -authflag: 0 for OCM, 1 for DDR, 2 for no authentication\n" " (specifies where to perform authentication)\n" " -encflag: 0 for device key, 1 for user key, 2 for no encryption\n"