This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/motionpro/Kconfig | 9 - board/motionpro/MAINTAINERS | 6 - board/motionpro/Makefile | 8 - board/motionpro/motionpro.c | 220 ---------------------- configs/motionpro_defconfig | 7 - include/configs/motionpro.h | 390 --------------------------------------- 7 files changed, 644 deletions(-) delete mode 100644 board/motionpro/Kconfig delete mode 100644 board/motionpro/MAINTAINERS delete mode 100644 board/motionpro/Makefile delete mode 100644 board/motionpro/motionpro.c delete mode 100644 configs/motionpro_defconfig delete mode 100644 include/configs/motionpro.h
diff --git a/arch/powerpc/cpu/mpc5xxx/Kconfig b/arch/powerpc/cpu/mpc5xxx/Kconfig index c7b6892..70018aa 100644 --- a/arch/powerpc/cpu/mpc5xxx/Kconfig +++ b/arch/powerpc/cpu/mpc5xxx/Kconfig @@ -18,9 +18,6 @@ config TARGET_A4M072 config TARGET_CM5200 bool "Support cm5200"
-config TARGET_MOTIONPRO - bool "Support motionpro" - config TARGET_MUNICES bool "Support munices"
@@ -64,7 +61,6 @@ source "board/a4m072/Kconfig" source "board/cm5200/Kconfig" source "board/ifm/o2dnt2/Kconfig" source "board/intercontrol/digsy_mtc/Kconfig" -source "board/motionpro/Kconfig" source "board/munices/Kconfig" source "board/phytec/pcm030/Kconfig" source "board/tqc/tqm5200/Kconfig" diff --git a/board/motionpro/Kconfig b/board/motionpro/Kconfig deleted file mode 100644 index f624f6c..0000000 --- a/board/motionpro/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_MOTIONPRO - -config SYS_BOARD - default "motionpro" - -config SYS_CONFIG_NAME - default "motionpro" - -endif diff --git a/board/motionpro/MAINTAINERS b/board/motionpro/MAINTAINERS deleted file mode 100644 index 2f8b5cb..0000000 --- a/board/motionpro/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MOTIONPRO BOARD -#M: - -S: Maintained -F: board/motionpro/ -F: include/configs/motionpro.h -F: configs/motionpro_defconfig diff --git a/board/motionpro/Makefile b/board/motionpro/Makefile deleted file mode 100644 index 898a384..0000000 --- a/board/motionpro/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := motionpro.o diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c deleted file mode 100644 index 4d0ebaa..0000000 --- a/board/motionpro/motionpro.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * modified for Promess PRO - by Andy Joseph, andy@promessdev.com - * modified for Promess PRO-Motion - by Robert McCullough, rob@promessdev.com - * modified by Chris M. Tumas 6/20/06 Change CAS latency to 2 from 3 - * Also changed the refresh for 100MHz operation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <miiphy.h> -#include <libfdt.h> - -#if defined(CONFIG_STATUS_LED) -#include <status_led.h> -#endif /* CONFIG_STATUS_LED */ - -/* Kollmorgen DPR initialization data */ -struct init_elem { - unsigned long addr; - unsigned len; - char *data; - } init_seq[] = { - {0x500003F2, 2, "\x86\x00"}, /* HW parameter */ - {0x500003F0, 2, "\x00\x00"}, - {0x500003EC, 4, "\x00\x80\xc1\x52"}, /* Magic word */ - }; - -/* - * Initialize Kollmorgen DPR - */ -static void kollmorgen_init(void) -{ - unsigned i, j; - vu_char *p; - - for (i = 0; i < sizeof(init_seq) / sizeof(struct init_elem); ++i) { - p = (vu_char *)init_seq[i].addr; - for (j = 0; j < init_seq[i].len; ++j) - *(p + j) = *(init_seq[i].data + j); - } - - printf("DPR: Kollmorgen DPR initialized\n"); -} - - -/* - * Early board initalization. - */ -int board_early_init_r(void) -{ - /* Now, when we are in RAM, disable Boot Chipselect and enable CS0 */ - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); - - /* Initialize Kollmorgen DPR */ - kollmorgen_init(); - - return 0; -} - - -/* - * Additional PHY intialization. After being reset in mpc5xxx_fec_init_phy(), - * PHY goes into FX mode. To take it out of the FX mode and switch into - * desired TX operation, one needs to clear the FX_SEL bit of Mode Control - * Register. - */ -void reset_phy(void) -{ - unsigned short mode_control; - - miiphy_read("FEC", CONFIG_PHY_ADDR, 0x15, &mode_control); - miiphy_write("FEC", CONFIG_PHY_ADDR, 0x15, - mode_control & 0xfffe); - return; -} - -#ifndef CONFIG_SYS_RAMBOOT -/* - * Helper function to initialize SDRAM controller. - */ -static void sdram_start(int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | - hi_addr_bit; - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | - hi_addr_bit; - - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | - hi_addr_bit; - - /* auto refresh, second time */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | - hi_addr_bit; - - /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; - - /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; -} -#endif /* !CONFIG_SYS_RAMBOOT */ - - -/* - * Initalize SDRAM - configure SDRAM controller, detect memory size. - */ -phys_size_t initdram(int board_type) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* According to AN3221 (MPC5200B SDRAM Initialization and - * Configuration), the SDelay register must be written a value of - * 0x00000004 as the first step of the SDRAM contorller configuration. - */ - *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; - - /* configure SDRAM start/end for detection */ - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + - __builtin_ffs(dramsize >> 20) - 1; - } else { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ - } - - /* let SDRAM CS1 start right after CS0 and disable it */ - *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; - -#else /* !CONFIG_SYS_RAMBOOT */ - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; - if (dramsize >= 0x13) - dramsize = (1 << (dramsize - 0x13)) << 20; - else - dramsize = 0; -#endif /* CONFIG_SYS_RAMBOOT */ - - /* return total ram size */ - return dramsize; -} - - -int checkboard(void) -{ - uchar rev = *(vu_char *)CPLD_REV_REGISTER; - printf("Board: Promess Motion-PRO board (CPLD rev. 0x%02x)\n", rev); - return 0; -} - - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ - - -#if defined(CONFIG_STATUS_LED) -void __led_init(led_id_t regaddr, int state) -{ - *((vu_long *) regaddr) |= ENABLE_GPIO_OUT; - - if (state == STATUS_LED_ON) - *((vu_long *) regaddr) |= LED_ON; - else - *((vu_long *) regaddr) &= ~LED_ON; -} - -void __led_set(led_id_t regaddr, int state) -{ - if (state == STATUS_LED_ON) - *((vu_long *) regaddr) |= LED_ON; - else - *((vu_long *) regaddr) &= ~LED_ON; -} - -void __led_toggle(led_id_t regaddr) -{ - *((vu_long *) regaddr) ^= LED_ON; -} -#endif /* CONFIG_STATUS_LED */ diff --git a/configs/motionpro_defconfig b/configs/motionpro_defconfig deleted file mode 100644 index 4d3f909..0000000 --- a/configs/motionpro_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_MOTIONPRO=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press "<Esc><Esc>" to stop\n" -CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h deleted file mode 100644 index 6dc84eb..0000000 --- a/include/configs/motionpro.h +++ /dev/null @@ -1,390 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -/* CPU and board */ -#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ -#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_NETCONSOLE 1 /* network console */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x2 -#define CONFIG_PHY_TYPE 0x79c874 -#define CONFIG_RESET_PHY_R 1 - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ -#undef CONFIG_BOOTARGS - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -/* - * Default environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "hostname=motionpro\0" \ - "netmask=255.255.255.0\0" \ - "ipaddr=192.168.1.106\0" \ - "serverip=192.168.1.100\0" \ - "gatewayip=192.168.1.100\0" \ - "console=ttyPSC0,115200\0" \ - "u-boot_addr=400000\0" \ - "kernel_addr=400000\0" \ - "fdt_addr=700000\0" \ - "ramdisk_addr=800000\0" \ - "multi_image_addr=800000\0" \ - "rootpath=/opt/eldk-4.2/ppc_6xx\0" \ - "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ - "bootfile=/tftpboot/motionpro/uImage\0" \ - "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ - "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ - "multi_image_file=kernel+initrd+dtb.img\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fff00000 +${filesize};" \ - "era fff00000 +${filesize}; " \ - "cp.b ${u-boot_addr} fff00000 ${filesize};" \ - "prot on fff00000 +${filesize}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "fat_args=setenv bootargs root=/dev/sda rw\0" \ - "mtdids=nor0=ff000000.flash\0" \ - "mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," \ - "128k(env),128k(redund_env)," \ - "128k(dtb),128k(user_data)\0" \ - "addcons=setenv bootargs ${bootargs} console=${console}\0" \ - "addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1 " \ - "console=${console}\0" \ - "net_nfs=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; " \ - "run nfsargs addip addmtd; " \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_self=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; " \ - "tftp ${ramdisk_addr} ${ramdisk_file}; " \ - "nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; " \ - "run ramargs addip addcons addmtd; " \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "fat_multi=run fat_args addip addmtd; fatload ide 0:1 " \ - "${multi_image_addr} ${multi_image_file}; " \ - "bootm ${multi_image_addr}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run fat_multi" - -/* - * do board-specific init - */ -#define CONFIG_BOARD_EARLY_INIT_R 1 - -/* - * Low level configuration - */ - -/* - * Clock configuration: SYS_XTALIN = 33MHz - */ -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 - -/* - * Set IPB speed to 100MHz - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK - -/* - * Memory map - */ -/* - * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000. - * Setting MBAR to otherwise will cause system hang when using SmartDMA such - * as network commands. - */ -#define CONFIG_SYS_MBAR 0xf0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* - * If building for running out of SDRAM, then MBAR has been set up beforehand - * (e.g., by the BDI). Otherwise we must specify the default boot-up value of - * MBAR, as given in the doccumentation. - */ -#if CONFIG_SYS_TEXT_BASE == 0x00100000 -#define CONFIG_SYS_DEFAULT_MBAR 0xf0000000 -#else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */ -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_LOWBOOT 1 -#endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */ - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ - -/* - * Chip selects configuration - */ -/* Boot Chipselect */ -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00045D00 - -/* Flash memory addressing */ -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_CFG CONFIG_SYS_BOOTCS_CFG - -/* Dual Port SRAM -- Kollmorgen Drive memory addressing */ -#define CONFIG_SYS_CS1_START 0x50000000 -#define CONFIG_SYS_CS1_SIZE 0x10000 -#define CONFIG_SYS_CS1_CFG 0x05055800 - -/* Local register access */ -#define CONFIG_SYS_CS2_START 0x50010000 -#define CONFIG_SYS_CS2_SIZE 0x10000 -#define CONFIG_SYS_CS2_CFG 0x05055800 - -/* Anybus CompactCom Module memory addressing */ -#define CONFIG_SYS_CS3_START 0x50020000 -#define CONFIG_SYS_CS3_SIZE 0x10000 -#define CONFIG_SYS_CS3_CFG 0x05055800 - -/* No burst and dead cycle = 2 for all CSs */ -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x22222222 - -/* - * SDRAM configuration - */ -/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */ -#define SDRAM_CONFIG1 0x62322900 -#define SDRAM_CONFIG2 0x88c70000 -#define SDRAM_CONTROL 0x504f0000 -#define SDRAM_MODE 0x00cd0000 - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_BASE 0xff000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ -#define CONFIG_FLASH_16BIT /* Flash is 16-bit */ - -/* - * MTD configuration - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=motionpro-0" -#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ - "13m(fs),2m(kernel),384k(uboot)," \ - "128k(env),128k(redund_env)," \ - "128k(dtb),-(user_data)" - -/* - * IDE/ATA configuration - */ -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060 -#define CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_DATA_OFFSET -#define CONFIG_SYS_ATA_STRIDE 4 -#define CONFIG_DOS_PARTITION - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* select I2C module #2 */ -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */ -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */ - -/* - * RTC configuration - */ -#define CONFIG_RTC_DS1337 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * Status LED configuration - */ -#define CONFIG_STATUS_LED /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED - -#define ENABLE_GPIO_OUT 0x00000024 -#define LED_ON 0x00000010 - -#ifndef __ASSEMBLY__ -/* - * In case of Motion-PRO, a LED is identified by its corresponding - * GPT Enable and Mode Select Register. - */ -typedef volatile unsigned long * led_id_t; - -extern void __led_init(led_id_t id, int state); -extern void __led_toggle(led_id_t id); -extern void __led_set(led_id_t id, int state); -#endif /* __ASSEMBLY__ */ - -/* - * Temperature sensor - */ -#define CONFIG_DTT_LM75 1 -#define CONFIG_DTT_SENSORS { 0x49 } - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the Flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_ENV_SECT_SIZE 0x20000 - -/* Configuration of redundant environment */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Pin multiplexing configuration - */ - -/* PSC1: UART1 - * PSC2: GPIO (default) - * PSC3: GPIO (default) - * USB: 2xUART4/5 - * Ethernet: Ethernet 100Mbit with MD - * Timer: CAN2/GPIO - * PSC6/IRDA: GPIO (default) - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1105a004 - -/* - * Motion-PRO's CPLD revision control register - */ -#define CPLD_REV_REGISTER (CONFIG_SYS_CS2_START + 0x06) - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03e00000 /* 1 ... 62 MiB in DRAM */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default kernel load addr */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ - -/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */