ti814x_evm has on-board socket for using Micron (MT29Fxx) family of NAND devices to GPMC interface. This patch - adds NAND related pin-mux configuration for same - adds #defines for NAND partitions to TI814x configs - enables support for NAND in TI814x configs -
Signed-off-by: Pekon Gupta pekon@ti.com --- board/ti/ti814x/evm.c | 4 +++ board/ti/ti814x/evm.h | 1 + board/ti/ti814x/mux.c | 59 +++++++++++++++++++++++++++++++++++++ include/configs/ti814x_evm.h | 70 +++++++++++++++++++++++++++++++++++++++++++- 4 files changed, 133 insertions(+), 1 deletion(-)
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c index 17fba5a..165cdf4 100644 --- a/board/ti/ti814x/evm.c +++ b/board/ti/ti814x/evm.c @@ -140,6 +140,9 @@ void s_init(void) /* Set Ethernet pins */ enable_enet_pin_mux();
+ /* Set NAND pins */ + enable_nand_pin_mux(); + /* Enable UART */ uart_enable();
@@ -162,6 +165,7 @@ void s_init(void) int board_init(void) { gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + gpmc_init(); return 0; }
diff --git a/board/ti/ti814x/evm.h b/board/ti/ti814x/evm.h index 6aebec6..113ccc0 100644 --- a/board/ti/ti814x/evm.h +++ b/board/ti/ti814x/evm.h @@ -4,5 +4,6 @@ void enable_uart0_pin_mux(void); void enable_mmc1_pin_mux(void); void enable_enet_pin_mux(void); +void enable_nand_pin_mux(void);
#endif /* _EVM_H */ diff --git a/board/ti/ti814x/mux.c b/board/ti/ti814x/mux.c index fd9f364..5410b1d 100644 --- a/board/ti/ti814x/mux.c +++ b/board/ti/ti814x/mux.c @@ -70,6 +70,60 @@ static struct module_pin_mux enet_pin_mux[] = { {OFFSET(pincntl258), MODE(0x01)}, /* EMAC[0]_MTXEN */ };
+static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(pincntl89) , MODE(1) | PULLUDDIS}, /* GPMC_D0 */ + {OFFSET(pincntl90) , MODE(1) | PULLUDDIS}, /* GPMC_D1 */ + {OFFSET(pincntl91) , MODE(1) | PULLUDDIS}, /* GPMC_D2 */ + {OFFSET(pincntl92) , MODE(1) | PULLUDDIS}, /* GPMC_D3 */ + {OFFSET(pincntl93) , MODE(1) | PULLUDDIS}, /* GPMC_D4 */ + {OFFSET(pincntl94) , MODE(1) | PULLUDDIS}, /* GPMC_D5 */ + {OFFSET(pincntl95) , MODE(1) | PULLUDDIS}, /* GPMC_D6 */ + {OFFSET(pincntl96) , MODE(1) | PULLUDDIS}, /* GPMC_D7 */ + {OFFSET(pincntl97) , MODE(1) | PULLUDDIS}, /* GPMC_D8 */ + {OFFSET(pincntl98) , MODE(1) | PULLUDDIS}, /* GPMC_D9 */ + {OFFSET(pincntl99) , MODE(1) | PULLUDDIS}, /* GPMC_D10 */ + {OFFSET(pincntl100), MODE(1) | PULLUDDIS}, /* GPMC_D11 */ + {OFFSET(pincntl101), MODE(1) | PULLUDDIS}, /* GPMC_D12 */ + {OFFSET(pincntl102), MODE(1) | PULLUDDIS}, /* GPMC_D13 */ + {OFFSET(pincntl103), MODE(1) | PULLUDDIS}, /* GPMC_D14 */ + {OFFSET(pincntl104), MODE(1) | PULLUDDIS}, /* GPMC_D15 */ + {OFFSET(pincntl117), MODE(2) | PULLUP_EN}, /* GPMC_A1 */ + {OFFSET(pincntl118), MODE(2) | PULLUP_EN}, /* GPMC_A2 */ + {OFFSET(pincntl119), MODE(2) | PULLUP_EN}, /* GPMC_A3 */ + {OFFSET(pincntl120), MODE(2) | PULLUP_EN}, /* GPMC_A4 */ + {OFFSET(pincntl168), MODE(5) | PULLUP_EN}, /* GPMC_A5 */ + {OFFSET(pincntl169), MODE(5) | PULLUP_EN}, /* GPMC_A6 */ + {OFFSET(pincntl170), MODE(5) | PULLUP_EN}, /* GPMC_A7 */ + {OFFSET(pincntl171), MODE(5) | PULLUP_EN}, /* GPMC_A8 */ + {OFFSET(pincntl172), MODE(5) | PULLUP_EN}, /* GPMC_A9 */ + {OFFSET(pincntl173), MODE(5) | PULLUP_EN}, /* GPMC_A10 */ + {OFFSET(pincntl174), MODE(5) | PULLUP_EN}, /* GPMC_A11 */ + {OFFSET(pincntl175), MODE(5) | PULLUP_EN}, /* GPMC_A12 */ + {OFFSET(pincntl228), MODE(2) | PULLUP_EN}, /* GPMC_A13 */ + {OFFSET(pincntl229), MODE(2) | PULLUP_EN}, /* GPMC_A14 */ + {OFFSET(pincntl230), MODE(2) | PULLUP_EN}, /* GPMC_A15 */ + {OFFSET(pincntl105), MODE(1) | PULLUP_EN}, /* GPMC_A16 */ + {OFFSET(pincntl106), MODE(1) | PULLUP_EN}, /* GPMC_A17 */ + {OFFSET(pincntl107), MODE(1) | PULLUP_EN}, /* GPMC_A18 */ + {OFFSET(pincntl108), MODE(1) | PULLUP_EN}, /* GPMC_A19 */ + {OFFSET(pincntl109), MODE(1) | PULLUP_EN}, /* GPMC_A20 */ + {OFFSET(pincntl110), MODE(1) | PULLUP_EN}, /* GPMC_A21 */ + {OFFSET(pincntl111), MODE(1) | PULLUP_EN}, /* GPMC_A22 */ + {OFFSET(pincntl112), MODE(1) | PULLUP_EN}, /* GPMC_A23 */ + {OFFSET(pincntl113), MODE(2) | PULLUP_EN}, /* GPMC_A24 */ + {OFFSET(pincntl114), MODE(2) | PULLUP_EN}, /* GPMC_A25 */ + {OFFSET(pincntl115), MODE(2) | PULLUP_EN}, /* GPMC_A26 */ + {OFFSET(pincntl116), MODE(2) | PULLUP_EN}, /* GPMC_A27 */ + {OFFSET(pincntl122), MODE(1) | PULLUDEN}, /* GPMC_CS0 */ + {OFFSET(pincntl127), MODE(1)}, /* GPMC_CLK */ + {OFFSET(pincntl128), MODE(1)}, /* GPMC_ALE_ADV */ + {OFFSET(pincntl129), MODE(1) | PULLUDEN}, /* GPMC_OE_RE */ + {OFFSET(pincntl130), MODE(1) | PULLUP_EN}, /* GPMC_WEN */ + {OFFSET(pincntl131), MODE(1) | PULLUP_EN}, /* GPMC_BEN0 */ + {OFFSET(pincntl133), MODE(1) | PULLUDEN}, /* GPMC_WAIT0 */ + {0}, +}; + void enable_uart0_pin_mux(void) { configure_module_pin_mux(uart0_pin_mux); @@ -84,3 +138,8 @@ void enable_enet_pin_mux(void) { configure_module_pin_mux(enet_pin_mux); } + +void enable_nand_pin_mux(void) +{ + configure_module_pin_mux(nand_pin_mux); +} diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index eac5ad0..b6fafc7 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -18,7 +18,6 @@
#define CONFIG_TI81XX #define CONFIG_TI814X -#define CONFIG_SYS_NO_FLASH #define CONFIG_OMAP
#include <asm/arch/omap.h> @@ -56,6 +55,7 @@ "fdtfile=\0" \ "console=ttyO0,115200n8\0" \ "optargs=\0" \ + "dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 ro\0" \ "mmcrootfstype=ext4 rootwait\0" \ @@ -134,6 +134,13 @@ #define CONFIG_DOS_PARTITION #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 +#define CONFIG_DFU_NAND +#define DFU_ALT_INFO_NAND \ + "u-boot-spl part 0 1;" \ + "u-boot-main part 0 2;" \ + "env variables part 0 3;" \ + "kernel part 0 4;" \ + "rootfs part 0 5"
/** * Physical Memory Map @@ -186,6 +193,14 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#ifdef CONFIG_SPL_OS_BOOT +/* nand */ +#define CONFIG_CMD_SPL_NAND_OFS 0x000000 /* end of u-boot */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x1000 +#endif + #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT
@@ -200,6 +215,32 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_NAND_AM33XX_BCH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 + +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
/* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM @@ -242,5 +283,32 @@ #define CONFIG_PHY_ADDR 1 #define CONFIG_PHY_ET1011C #define CONFIG_PHY_ET1011C_TX_CLK_FIX +#define CONFIG_NAND +/* NAND support */ +#ifdef CONFIG_NAND +#define CONFIG_MTD_NAND_OMAP_BCH +#define CONFIG_CMD_NAND +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ + "128k(u-boot-spl)," \ + "2M(u-boot-main)," \ + "128k(u-boot-env),4M(kernel),-(rootfs)" +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define NAND_BASE (0x08000000) +#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ + /* to access nand at */ + /* CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND + devices */ +#define CONFIG_SYS_NAND_BOOT +#if !defined(CONFIG_SPI_BOOT) +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#endif +#endif
#endif /* ! __CONFIG_TI814X_EVM_H */