Configure fitImage for U-Boot with a device tree for imx6 quad/dual and duallite/solo. This enables to support the imx6 derivates quad/dual/duallite/solo with a single binary.
Signed-off-by: Ludwig Zenz lzenz@dh-electronics.com --- board/dhelectronics/dh_imx6/dh_imx6.c | 15 +++++++++++++++ configs/dh_imx6_defconfig | 7 +++++-- 2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c index e5ff91248a..cca8e832ec 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6.c +++ b/board/dhelectronics/dh_imx6/dh_imx6.c @@ -355,3 +355,18 @@ int checkboard(void) puts("Board: DHCOM i.MX6\n"); return 0; } + +#ifdef CONFIG_MULTI_DTB_FIT +int board_fit_config_name_match(const char *name) +{ + if (is_mx6dq()) { + if (!strcmp(name, "imx6q-dhcom-pdk2")) + return 0; + } else if (is_mx6sdl()) { + if (!strcmp(name, "imx6dl-dhcom-pdk2")) + return 0; + } + + return -1; +} +#endif diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 3f615b4634..4734ed76e5 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -10,14 +10,13 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000 -CONFIG_DM_GPIO=y -CONFIG_DM_MMC=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y +CONFIG_SPL_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTDELAY=3 # CONFIG_USE_BOOTCOMMAND is not set @@ -43,9 +42,13 @@ CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-dhcom-pdk2" +CONFIG_OF_LIST="imx6q-dhcom-pdk2 imx6dl-dhcom-pdk2" +CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DWC_AHSATA=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y CONFIG_FSL_ESDHC=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y