Hi Tim,
On 03/27/2014 11:33 AM, Tim Sander wrote:
Hi Michael, Jagan
Thanks for your replies.
On Thu, Mar 27, 2014 at 1:51 PM, Michal Simek monstr@monstr.eu wrote:
Hi,
On 03/27/2014 09:08 AM, Tim Sander wrote:
Hi
As i have seen that the Xilinx support has entered master i just tried to boot it on a Xilinx Zynx Zedboard Rev. D. The build works with the xilinx git tree so i am pretty confident that its not some issues with bootgen or the embedded fpga image.
The board loads the fpga which can be seen by the blue "done" led of the ZedBoard. But then the LED turns off and about after a second or so it just lights up shortly again to turn off again. So it seems as if the board is somehow caught in a reboot loop. Any ideas what might be wrong?
I am building with: export PATH=~/xilinx/SDK/2013.3/gnu/arm/lin/bin:$PATH export CROSS_COMPILE=arm-xilinx-linux-gnueabi- make clean make distclean make zynq_zed_config make
The BOOT.BIN is build xilinx/SDK/2013.3/bin/lin64/bootgen -image u-boot.bif -w on -o BOOT.BIN
And u-boot.bif looks like that: the_ROM_image: {
[bootloader]zynq_fsbl_0.elf
system.bit u-boot.elf
I have added the zynq-zed.dtb file here, as i was not sure where else to put it...
I have just tested on zedboard rev-C I have here
Head u-boot commit commit commit 2c072c958bb544c72f0e848375803dbd6971f022 Author: Simon Glass sjg@chromium.org Date: Thu Feb 27 13:26:25 2014 -0700
sandbox: config: Enable cros_ec emulation and related items
Enable the Chrome OS EC emulation for sandbox along with LCD, sound expanded GPIOs and a few other options to make this work correctly.
Reviewed-by: Simon Glass sjg@chromium.org Tested-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Simon Glass sjg@chromium.org
Copy attached file over this one arch/arm/dts/zynq-zed.dts
export ARCH=arm export CROSS_COMPILE=arm-xilinx-linux-gnueabi- make zynq_zed_config make -j
run xmd
connect arm hw dow zynq_fsbl.elf run stop dow -data u-boot-dtb.bin 0x4000000 rwr pc 0x4000000 con exit
And you should see something like this on your console
U-Boot 2014.04-rc2-00061-g2c072c9-dirty (Mar 27 2014 - 12:47:39)
I2C: ready Memory: ECC disabled DRAM: 512 MiB MMC: zynq_sdhci: 0 Using default environment
In: serial Out: serial Err: serial Model: Xilinx Zynq Net: Gem.e000b000 Warning: failed to set MAC address
Hit any key to stop autoboot: 0 zynq-uboot>
}
mainline u-boot support is using configuration based on dts files (OF_CONTROL) And because our DTSes are almost empty in mainline I expect you are not able to see anything from u-boot. I recommend you to copy dts file from xilinx kernel and then use u-boot-dtb version.
Ok i tried this, and now the reboot loops seems to be gone. The blue "done" led now only switches "on" one time and stays on. Unfortunatly i still don't see anything on the console in this case. I can see that the registers lr 0x1d70 0x1d70 pc 0xcf6c 0xcf6c But according to the u-boot map there is nothing and i am not sure how to get information about the relocation without u-boot command line.
Or the second option is to remove OF_CONTROL from zynq-common.h file and then I hope you should be able to see something on console.
Removeing OF_CONTROL gives a compile error: xilinx/zynq/u-boot-xlnx/arch/arm/lib/board.c:633: undefined reference to `checkboard' lib/built-in.o: In function `rsa_verify_with_keynode': xilinx/zynq/u-boot-xlnx/lib/rsa/rsa-verify.c:284: undefined reference to `fdtdec_get_int'
More things has changed recently. If you do these changes then non DT configuration is performed.
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 485a5e4..559ef3d 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -62,6 +62,11 @@ int board_init(void) return 0; }
+int checkboard(void) +{ + return 0; +} + int board_late_init(void) { switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 731e69b..8a63cd5 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -200,14 +200,8 @@ #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
/* FDT support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE #define CONFIG_DISPLAY_BOARDINFO_LATE
-/* RSA support */ -#define CONFIG_FIT_SIGNATURE -#define CONFIG_RSA - /* Extend size of kernel image for uncompression */ #define CONFIG_SYS_BOOTM_LEN (20 * 1024 * 1024)
Then you can use u-boot also for boot.bin (bootgen) generation.
load fsbl as above and then dow u-boot run exit
If you use ML, as Michal said - u-boot operates through FDT support. But I guess even if you use u-boot.elf with FDT enabled, you must get the below error ** CONFIG_OF_CONTROL defined but no FDT - please see doc/README.fdt-control"
Mh, i now appended the fdt in the bif file. Is this the right approach?
I won't work.
Means even uart node is not written in zynq-zed.dts serial configurations are static driver it self as of now.
Does this mean that the serial drivers are statically defined and do not take the device tree file into account?
Jagan wasn't correct on this one because one of my patch series has changed this. For static configuration (without OF_CONTROL) are driver statically defined. For DT configuration is console selection taken from DTS/DTB.
Please check and may be you can try u-boot-dtb.elf.
Mh, don't know how to create this kind of file?
Jagan maybe knows more but I don't think u-boot-dtb.elf is generated. Just u-boot-dtb.bin is generated which should be copied as data file in xmd and not sure if binary file can be directly used for bootgen.
Thanks, Michal