From: Suresh Gupta suresh.gupta@freescale.com
- Added SERDES2 PRTCLs = 0x98, 0x9E - Default Phy Addresses for Teranetics PHY on XAUI card The PHY addresses of Teranetics PHY on XAUI riser card are assigned based on the slot it is in. Switches SW4[2:4] and SW6[2:4] on AMC2PEX-2S On B4860QDS, AMC2PEX card decide the PHY addresses on slot1 and slot2 - Configure MDIO for 10Gig Mac
Signed-off-by: Suresh Gupta suresh.gupta@freescale.com --- board/freescale/b4860qds/eth_b4860qds.c | 38 +++++++++++++++++++++++++++++++ drivers/net/fm/b4860.c | 4 +++- include/configs/B4860QDS.h | 6 ++++- 3 files changed, 46 insertions(+), 2 deletions(-)
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c index 68e2725..0e151dd 100644 --- a/board/freescale/b4860qds/eth_b4860qds.c +++ b/board/freescale/b4860qds/eth_b4860qds.c @@ -275,6 +275,27 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR); break; + case 0x98: + /* XAUI in Slot1 and Slot2 */ + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S" + "for FM1_10GEC1: %x\n", + CONFIG_SYS_FM1_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC1, + CONFIG_SYS_FM1_10GEC1_PHY_ADDR); + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S" + "for FM1_10GEC2: %x\n", + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + break; + case 0x9E: + /* XAUI in Slot2 */ + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S" + "for FM1_10GEC2: %x\n", + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + break; default: printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n", serdes2_prtcl); @@ -300,6 +321,23 @@ int board_eth_init(bd_t *bis) } }
+ for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + int idx = i - FM1_10GEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME)); + break; + default: + printf("Fman1: 10GSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + } + + cpu_eth_init(bis); #endif
diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c index 8cde7af..a247ccc 100644 --- a/drivers/net/fm/b4860.c +++ b/drivers/net/fm/b4860.c @@ -55,8 +55,10 @@ phy_interface_t fman_port_enet_if(enum fm_port port) if (is_device_disabled(port)) return PHY_INTERFACE_MODE_NONE;
+ /*B4860 has two 10Gig Mac*/ if ((port == FM1_10GEC1 || port == FM1_10GEC2) - && (is_serdes_configured(XAUI_FM1))) + && ((is_serdes_configured(XAUI_FM1_MAC9)) + || (is_serdes_configured(XAUI_FM1_MAC10)))) return PHY_INTERFACE_MODE_XGMII;
/* Fix me need to handle RGMII here first */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 00ee5ac..22cd808 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -646,7 +646,11 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_FMAN_ENET #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 + +/*B4860 QDS AMC2PEX-2S default PHY_ADDR */ +#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/ +#define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/ +
#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d