On Thu, Sep 12, 2019 at 12:12 PM Ley Foon Tan ley.foon.tan@intel.com wrote:
Restructure Stratix 10 SDRAM driver. Move common code to separate file, in preparation to support SDRAM driver for Agilex.
Signed-off-by: Ley Foon Tan ley.foon.tan@intel.com
v4:
- Change to use base address from DT.
I know someone has requested this, but I would have preferred it to be in a separate patch. At least you need to put this into the commit message: the patch says you're restructuring, but it does more by reading the base address from DT.
Regards, Simon
v3:
- Change sdram_common.* to sdram_soc64.*
drivers/ddr/altera/Makefile | 2 +- drivers/ddr/altera/sdram_s10.c | 296 +---------------- drivers/ddr/altera/sdram_s10.h | 148 +-------- drivers/ddr/altera/sdram_soc64.c | 304 ++++++++++++++++++ .../ddr/altera/{sdram_s10.h => sdram_soc64.h} | 70 ++-- 5 files changed, 341 insertions(+), 479 deletions(-) create mode 100644 drivers/ddr/altera/sdram_soc64.c copy drivers/ddr/altera/{sdram_s10.h => sdram_soc64.h} (79%)
diff --git a/drivers/ddr/altera/Makefile b/drivers/ddr/altera/Makefile index 341ac0d73b..eb8da13b7d 100644 --- a/drivers/ddr/altera/Makefile +++ b/drivers/ddr/altera/Makefile @@ -9,5 +9,5 @@ ifdef CONFIG_$(SPL_)ALTERA_SDRAM obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram_gen5.o sequencer.o obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += sdram_arria10.o -obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_s10.o +obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_soc64.o sdram_s10.o endif diff --git a/drivers/ddr/altera/sdram_s10.c b/drivers/ddr/altera/sdram_s10.c index 9578aa743d..fcab3ae3e4 100644 --- a/drivers/ddr/altera/sdram_s10.c +++ b/drivers/ddr/altera/sdram_s10.c @@ -14,28 +14,14 @@ #include "sdram_s10.h" #include <wait_bit.h> #include <asm/arch/firewall.h> -#include <asm/arch/system_manager.h> #include <asm/arch/reset_manager.h> #include <asm/io.h> #include <linux/sizes.h>
-struct altera_sdram_priv {
struct ram_info info;struct reset_ctl_bulk resets;-};
-struct altera_sdram_platdata {
void __iomem *hmc;void __iomem *ddr_sch;void __iomem *iomhc;-};
DECLARE_GLOBAL_DATA_PTR;
#define DDR_CONFIG(A, B, C, R) (((A) << 24) | ((B) << 16) | ((C) << 8) | (R))
-#define PGTABLE_OFF 0x4000
/* The followring are the supported configurations */ u32 ddr_config[] = { /* DDR_CONFIG(Address order,Bank,Column,Row) */ @@ -62,28 +48,6 @@ u32 ddr_config[] = { DDR_CONFIG(1, 4, 10, 17), };
-static u32 hmc_readl(struct altera_sdram_platdata *plat, u32 reg) -{
return readl(plat->iomhc + reg);-}
-static u32 hmc_ecc_readl(struct altera_sdram_platdata *plat, u32 reg) -{
return readl(plat->hmc + reg);-}
-static u32 hmc_ecc_writel(struct altera_sdram_platdata *plat,
u32 data, u32 reg)-{
return writel(data, plat->hmc + reg);-}
-static u32 ddr_sch_writel(struct altera_sdram_platdata *plat, u32 data,
u32 reg)-{
return writel(data, plat->ddr_sch + reg);-}
int match_ddr_conf(u32 ddr_conf) { int i; @@ -95,193 +59,12 @@ int match_ddr_conf(u32 ddr_conf) return 0; }
-static int emif_clear(struct altera_sdram_platdata *plat) -{
hmc_ecc_writel(plat, 0, RSTHANDSHAKECTRL);return wait_for_bit_le32((const void *)(plat->hmc +RSTHANDSHAKESTAT),DDR_HMC_RSTHANDSHAKE_MASK,false, 1000, false);-}
-static int emif_reset(struct altera_sdram_platdata *plat) -{
u32 c2s, s2c, ret;c2s = hmc_ecc_readl(plat, RSTHANDSHAKECTRL) & DDR_HMC_RSTHANDSHAKE_MASK;s2c = hmc_ecc_readl(plat, RSTHANDSHAKESTAT) & DDR_HMC_RSTHANDSHAKE_MASK;debug("DDR: c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x dst=%08x\n",c2s, s2c, hmc_readl(plat, NIOSRESERVED0),hmc_readl(plat, NIOSRESERVED1), hmc_readl(plat, NIOSRESERVED2),hmc_readl(plat, DRAMSTS));if (s2c && emif_clear(plat)) {printf("DDR: emif_clear() failed\n");return -1;}debug("DDR: Triggerring emif reset\n");hmc_ecc_writel(plat, DDR_HMC_CORE2SEQ_INT_REQ, RSTHANDSHAKECTRL);/* if seq2core[3] = 0, we are good */ret = wait_for_bit_le32((const void *)(plat->hmc +RSTHANDSHAKESTAT),DDR_HMC_SEQ2CORE_INT_RESP_MASK,false, 1000, false);if (ret) {printf("DDR: failed to get ack from EMIF\n");return ret;}ret = emif_clear(plat);if (ret) {printf("DDR: emif_clear() failed\n");return ret;}debug("DDR: %s triggered successly\n", __func__);return 0;-}
-static int poll_hmc_clock_status(void) -{
return wait_for_bit_le32((const void *)(socfpga_sysmgr_base +SYSMGR_SOC64_HMC_CLK),SYSMGR_HMC_CLK_STATUS_MSK, true, 1000, false);-}
-static void sdram_clear_mem(phys_addr_t addr, phys_size_t size) -{
phys_size_t i;if (addr % CONFIG_SYS_CACHELINE_SIZE) {printf("DDR: address 0x%llx is not cacheline size aligned.\n",addr);hang();}if (size % CONFIG_SYS_CACHELINE_SIZE) {printf("DDR: size 0x%llx is not multiple of cacheline size\n",size);hang();}/* Use DC ZVA instruction to clear memory to zeros by a cache line */for (i = 0; i < size; i = i + CONFIG_SYS_CACHELINE_SIZE) {asm volatile("dc zva, %0":: "r"(addr): "memory");addr += CONFIG_SYS_CACHELINE_SIZE;}-}
-static void sdram_init_ecc_bits(bd_t *bd) -{
phys_size_t size, size_init;phys_addr_t start_addr;int bank = 0;unsigned int start = get_timer(0);icache_enable();start_addr = bd->bi_dram[0].start;size = bd->bi_dram[0].size;/* Initialize small block for page table */memset((void *)start_addr, 0, PGTABLE_SIZE + PGTABLE_OFF);gd->arch.tlb_addr = start_addr + PGTABLE_OFF;gd->arch.tlb_size = PGTABLE_SIZE;start_addr += PGTABLE_SIZE + PGTABLE_OFF;size -= (PGTABLE_OFF + PGTABLE_SIZE);dcache_enable();while (1) {while (size) {size_init = min((phys_addr_t)SZ_1G, (phys_addr_t)size);sdram_clear_mem(start_addr, size_init);size -= size_init;start_addr += size_init;WATCHDOG_RESET();}bank++;if (bank >= CONFIG_NR_DRAM_BANKS)break;start_addr = bd->bi_dram[bank].start;size = bd->bi_dram[bank].size;}dcache_disable();icache_disable();printf("SDRAM-ECC: Initialized success with %d ms\n",(unsigned int)get_timer(start));-}
-static void sdram_size_check(bd_t *bd) -{
phys_size_t total_ram_check = 0;phys_size_t ram_check = 0;phys_addr_t start = 0;int bank;/* Sanity check ensure correct SDRAM size specified */debug("DDR: Running SDRAM size sanity check\n");for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {start = bd->bi_dram[bank].start;while (ram_check < bd->bi_dram[bank].size) {ram_check += get_ram_size((void *)(start + ram_check),(phys_size_t)SZ_1G);}total_ram_check += ram_check;ram_check = 0;}/* If the ram_size is 2GB smaller, we can assume the IO space is* not mapped in. gd->ram_size is the actual size of the dram* not the accessible size.*/if (total_ram_check != gd->ram_size) {puts("DDR: SDRAM size check failed!\n");hang();}debug("DDR: SDRAM size check passed!\n");-}
-/**
- sdram_calculate_size() - Calculate SDRAM size
- Calculate SDRAM device size based on SDRAM controller parameters.
- Size is specified in bytes.
- */
-static phys_size_t sdram_calculate_size(struct altera_sdram_platdata *plat) -{
u32 dramaddrw = hmc_readl(plat, DRAMADDRW);phys_size_t size = 1 << (DRAMADDRW_CFG_CS_ADDR_WIDTH(dramaddrw) +DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw) +DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) +DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw) +DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw));size *= (2 << (hmc_ecc_readl(plat, DDRIOCTRL) &DDR_HMC_DDRIOCTRL_IOSIZE_MSK));return size;-}
/**
- sdram_mmr_init_full() - Function to initialize SDRAM MMR
- Initialize the SDRAM MMR.
*/ -static int sdram_mmr_init_full(struct udevice *dev) +int sdram_mmr_init_full(struct udevice *dev) { struct altera_sdram_platdata *plat = dev->platdata; struct altera_sdram_priv *priv = dev_get_priv(dev); @@ -534,80 +317,3 @@ static int sdram_mmr_init_full(struct udevice *dev) return 0; }
-static int altera_sdram_ofdata_to_platdata(struct udevice *dev) -{
struct altera_sdram_platdata *plat = dev->platdata;fdt_addr_t addr;addr = dev_read_addr_index(dev, 0);if (addr == FDT_ADDR_T_NONE)return -EINVAL;plat->ddr_sch = (void __iomem *)addr;addr = dev_read_addr_index(dev, 1);if (addr == FDT_ADDR_T_NONE)return -EINVAL;plat->iomhc = (void __iomem *)addr;addr = dev_read_addr_index(dev, 2);if (addr == FDT_ADDR_T_NONE)return -EINVAL;plat->hmc = (void __iomem *)addr;return 0;-}
-static int altera_sdram_probe(struct udevice *dev) -{
int ret;struct altera_sdram_priv *priv = dev_get_priv(dev);ret = reset_get_bulk(dev, &priv->resets);if (ret) {dev_err(dev, "Can't get reset: %d\n", ret);return -ENODEV;}reset_deassert_bulk(&priv->resets);if (sdram_mmr_init_full(dev) != 0) {puts("SDRAM init failed.\n");goto failed;}return 0;-failed:
reset_release_bulk(&priv->resets);return -ENODEV;-}
-static int altera_sdram_get_info(struct udevice *dev,
struct ram_info *info)-{
struct altera_sdram_priv *priv = dev_get_priv(dev);info->base = priv->info.base;info->size = priv->info.size;return 0;-}
-static struct ram_ops altera_sdram_ops = {
.get_info = altera_sdram_get_info,-};
-static const struct udevice_id altera_sdram_ids[] = {
{ .compatible = "altr,sdr-ctl-s10" },{ /* sentinel */ }-};
-U_BOOT_DRIVER(altera_sdram) = {
.name = "altr_sdr_ctl",.id = UCLASS_RAM,.of_match = altera_sdram_ids,.ops = &altera_sdram_ops,.ofdata_to_platdata = altera_sdram_ofdata_to_platdata,.platdata_auto_alloc_size = sizeof(struct altera_sdram_platdata),.probe = altera_sdram_probe,.priv_auto_alloc_size = sizeof(struct altera_sdram_priv),-}; diff --git a/drivers/ddr/altera/sdram_s10.h b/drivers/ddr/altera/sdram_s10.h index 096c06cba2..cca4cb35ec 100644 --- a/drivers/ddr/altera/sdram_s10.h +++ b/drivers/ddr/altera/sdram_s10.h @@ -11,48 +11,6 @@ #define DDR_READ_LATENCY_DELAY 40 #define DDR_ACTIVATE_FAWBANK 0x1
-/* ECC HMC registers */ -#define DDRIOCTRL 0x8 -#define DDRCALSTAT 0xc -#define DRAMADDRWIDTH 0xe0 -#define ECCCTRL1 0x100 -#define ECCCTRL2 0x104 -#define ERRINTEN 0x110 -#define ERRINTENS 0x114 -#define INTMODE 0x11c -#define INTSTAT 0x120 -#define AUTOWB_CORRADDR 0x138 -#define ECC_REG2WRECCDATABUS 0x144 -#define ECC_DIAGON 0x150 -#define ECC_DECSTAT 0x154 -#define HPSINTFCSEL 0x210 -#define RSTHANDSHAKECTRL 0x214 -#define RSTHANDSHAKESTAT 0x218
-#define DDR_HMC_DDRIOCTRL_IOSIZE_MSK 0x00000003 -#define DDR_HMC_DDRCALSTAT_CAL_MSK BIT(0) -#define DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK BIT(16) -#define DDR_HMC_ECCCTL_CNT_RST_SET_MSK BIT(8) -#define DDR_HMC_ECCCTL_ECC_EN_SET_MSK BIT(0) -#define DDR_HMC_ECCCTL2_RMW_EN_SET_MSK BIT(8) -#define DDR_HMC_ECCCTL2_AWB_EN_SET_MSK BIT(0) -#define DDR_HMC_ECC_DIAGON_ECCDIAGON_EN_SET_MSK BIT(16) -#define DDR_HMC_ECC_DIAGON_WRDIAGON_EN_SET_MSK BIT(0) -#define DDR_HMC_ERRINTEN_SERRINTEN_EN_SET_MSK BIT(0) -#define DDR_HMC_ERRINTEN_DERRINTEN_EN_SET_MSK BIT(1) -#define DDR_HMC_INTSTAT_SERRPENA_SET_MSK BIT(0) -#define DDR_HMC_INTSTAT_DERRPENA_SET_MSK BIT(1) -#define DDR_HMC_INTSTAT_ADDRMTCFLG_SET_MSK BIT(16) -#define DDR_HMC_INTMODE_INTMODE_SET_MSK BIT(0) -#define DDR_HMC_RSTHANDSHAKE_MASK 0x000000ff -#define DDR_HMC_CORE2SEQ_INT_REQ 0xF -#define DDR_HMC_SEQ2CORE_INT_RESP_MASK BIT(3) -#define DDR_HMC_HPSINTFCSEL_ENABLE_MASK 0x001f1f1f
-#define DDR_HMC_ERRINTEN_INTMASK \
(DDR_HMC_ERRINTEN_SERRINTEN_EN_SET_MSK | \DDR_HMC_ERRINTEN_DERRINTEN_EN_SET_MSK)/* NOC DDR scheduler */ #define DDR_SCH_ID_COREID 0 #define DDR_SCH_ID_REVID 0x4 @@ -79,110 +37,6 @@ #define DDR_SCH_DEVTODEV_BUSRDTOWR_OFF 2 #define DDR_SCH_DEVTODEV_BUSWRTORD_OFF 4
-/* HMC MMR IO48 registers */ -#define CTRLCFG0 0x28 -#define CTRLCFG1 0x2c -#define DRAMTIMING0 0x50 -#define CALTIMING0 0x7c -#define CALTIMING1 0x80 -#define CALTIMING2 0x84 -#define CALTIMING3 0x88 -#define CALTIMING4 0x8c -#define CALTIMING9 0xa0 -#define DRAMADDRW 0xa8 -#define DRAMSTS 0xec -#define NIOSRESERVED0 0x110 -#define NIOSRESERVED1 0x114 -#define NIOSRESERVED2 0x118
-#define DRAMADDRW_CFG_COL_ADDR_WIDTH(x) \
(((x) >> 0) & 0x1F)-#define DRAMADDRW_CFG_ROW_ADDR_WIDTH(x) \
(((x) >> 5) & 0x1F)-#define DRAMADDRW_CFG_BANK_ADDR_WIDTH(x) \
(((x) >> 10) & 0xF)-#define DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(x) \
(((x) >> 14) & 0x3)-#define DRAMADDRW_CFG_CS_ADDR_WIDTH(x) \
(((x) >> 16) & 0x7)-#define CTRLCFG0_CFG_MEMTYPE(x) \
(((x) >> 0) & 0xF)-#define CTRLCFG0_CFG_DIMM_TYPE(x) \
(((x) >> 4) & 0x7)-#define CTRLCFG0_CFG_AC_POS(x) \
(((x) >> 7) & 0x3)-#define CTRLCFG0_CFG_CTRL_BURST_LEN(x) \
(((x) >> 9) & 0x1F)-#define CTRLCFG1_CFG_DBC3_BURST_LEN(x) \
(((x) >> 0) & 0x1F)-#define CTRLCFG1_CFG_ADDR_ORDER(x) \
(((x) >> 5) & 0x3)-#define CTRLCFG1_CFG_CTRL_EN_ECC(x) \
(((x) >> 7) & 0x1)-#define DRAMTIMING0_CFG_TCL(x) \
(((x) >> 0) & 0x7F)-#define CALTIMING0_CFG_ACT_TO_RDWR(x) \
(((x) >> 0) & 0x3F)-#define CALTIMING0_CFG_ACT_TO_PCH(x) \
(((x) >> 6) & 0x3F)-#define CALTIMING0_CFG_ACT_TO_ACT(x) \
(((x) >> 12) & 0x3F)-#define CALTIMING0_CFG_ACT_TO_ACT_DB(x) \
(((x) >> 18) & 0x3F)-#define CALTIMING1_CFG_RD_TO_RD(x) \
(((x) >> 0) & 0x3F)-#define CALTIMING1_CFG_RD_TO_RD_DC(x) \
(((x) >> 6) & 0x3F)-#define CALTIMING1_CFG_RD_TO_RD_DB(x) \
(((x) >> 12) & 0x3F)-#define CALTIMING1_CFG_RD_TO_WR(x) \
(((x) >> 18) & 0x3F)-#define CALTIMING1_CFG_RD_TO_WR_DC(x) \
(((x) >> 24) & 0x3F)-#define CALTIMING2_CFG_RD_TO_WR_DB(x) \
(((x) >> 0) & 0x3F)-#define CALTIMING2_CFG_RD_TO_WR_PCH(x) \
(((x) >> 6) & 0x3F)-#define CALTIMING2_CFG_RD_AP_TO_VALID(x) \
(((x) >> 12) & 0x3F)-#define CALTIMING2_CFG_WR_TO_WR(x) \
(((x) >> 18) & 0x3F)-#define CALTIMING2_CFG_WR_TO_WR_DC(x) \
(((x) >> 24) & 0x3F)-#define CALTIMING3_CFG_WR_TO_WR_DB(x) \
(((x) >> 0) & 0x3F)-#define CALTIMING3_CFG_WR_TO_RD(x) \
(((x) >> 6) & 0x3F)-#define CALTIMING3_CFG_WR_TO_RD_DC(x) \
(((x) >> 12) & 0x3F)-#define CALTIMING3_CFG_WR_TO_RD_DB(x) \
(((x) >> 18) & 0x3F)-#define CALTIMING3_CFG_WR_TO_PCH(x) \
(((x) >> 24) & 0x3F)-#define CALTIMING4_CFG_WR_AP_TO_VALID(x) \
(((x) >> 0) & 0x3F)-#define CALTIMING4_CFG_PCH_TO_VALID(x) \
(((x) >> 6) & 0x3F)-#define CALTIMING4_CFG_PCH_ALL_TO_VALID(x) \
(((x) >> 12) & 0x3F)-#define CALTIMING4_CFG_ARF_TO_VALID(x) \
(((x) >> 18) & 0xFF)-#define CALTIMING4_CFG_PDN_TO_VALID(x) \
(((x) >> 26) & 0x3F)-#define CALTIMING9_CFG_4_ACT_TO_ACT(x) \
(((x) >> 0) & 0xFF)-/* Firewall DDR scheduler MPFE */ -#define FW_HMC_ADAPTOR_REG_ADDR 0xf8020004 -#define FW_HMC_ADAPTOR_MPU_MASK BIT(0) +#include "sdram_soc64.h"
#endif /* _SDRAM_S10_H_ */ diff --git a/drivers/ddr/altera/sdram_soc64.c b/drivers/ddr/altera/sdram_soc64.c new file mode 100644 index 0000000000..3097e0671c --- /dev/null +++ b/drivers/ddr/altera/sdram_soc64.c @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright (C) 2016-2019 Intel Corporation <www.intel.com>
- */
+#include <common.h> +#include <dm.h> +#include <errno.h> +#include <div64.h> +#include <fdtdec.h> +#include <ram.h> +#include <reset.h> +#include "sdram_soc64.h" +#include <wait_bit.h> +#include <asm/arch/firewall.h> +#include <asm/arch/system_manager.h> +#include <asm/arch/reset_manager.h> +#include <asm/io.h> +#include <linux/sizes.h>
+#define PGTABLE_OFF 0x4000
+u32 hmc_readl(struct altera_sdram_platdata *plat, u32 reg) +{
return readl(plat->iomhc + reg);+}
+u32 hmc_ecc_readl(struct altera_sdram_platdata *plat, u32 reg) +{
return readl(plat->hmc + reg);+}
+u32 hmc_ecc_writel(struct altera_sdram_platdata *plat,
u32 data, u32 reg)+{
return writel(data, plat->hmc + reg);+}
+u32 ddr_sch_writel(struct altera_sdram_platdata *plat, u32 data,
u32 reg)+{
return writel(data, plat->ddr_sch + reg);+}
+int emif_clear(struct altera_sdram_platdata *plat) +{
hmc_ecc_writel(plat, 0, RSTHANDSHAKECTRL);return wait_for_bit_le32((const void *)(plat->hmc +RSTHANDSHAKESTAT),DDR_HMC_RSTHANDSHAKE_MASK,false, 1000, false);+}
+int emif_reset(struct altera_sdram_platdata *plat) +{
u32 c2s, s2c, ret;c2s = hmc_ecc_readl(plat, RSTHANDSHAKECTRL) & DDR_HMC_RSTHANDSHAKE_MASK;s2c = hmc_ecc_readl(plat, RSTHANDSHAKESTAT) & DDR_HMC_RSTHANDSHAKE_MASK;debug("DDR: c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x dst=%08x\n",c2s, s2c, hmc_readl(plat, NIOSRESERVED0),hmc_readl(plat, NIOSRESERVED1), hmc_readl(plat, NIOSRESERVED2),hmc_readl(plat, DRAMSTS));if (s2c && emif_clear(plat)) {printf("DDR: emif_clear() failed\n");return -1;}debug("DDR: Triggerring emif reset\n");hmc_ecc_writel(plat, DDR_HMC_CORE2SEQ_INT_REQ, RSTHANDSHAKECTRL);/* if seq2core[3] = 0, we are good */ret = wait_for_bit_le32((const void *)(plat->hmc +RSTHANDSHAKESTAT),DDR_HMC_SEQ2CORE_INT_RESP_MASK,false, 1000, false);if (ret) {printf("DDR: failed to get ack from EMIF\n");return ret;}ret = emif_clear(plat);if (ret) {printf("DDR: emif_clear() failed\n");return ret;}debug("DDR: %s triggered successly\n", __func__);return 0;+}
+int poll_hmc_clock_status(void) +{
return wait_for_bit_le32((const void *)(socfpga_sysmgr_base +SYSMGR_SOC64_HMC_CLK),SYSMGR_HMC_CLK_STATUS_MSK, true, 1000, false);+}
+void sdram_clear_mem(phys_addr_t addr, phys_size_t size) +{
phys_size_t i;if (addr % CONFIG_SYS_CACHELINE_SIZE) {printf("DDR: address 0x%llx is not cacheline size aligned.\n",addr);hang();}if (size % CONFIG_SYS_CACHELINE_SIZE) {printf("DDR: size 0x%llx is not multiple of cacheline size\n",size);hang();}/* Use DC ZVA instruction to clear memory to zeros by a cache line */for (i = 0; i < size; i = i + CONFIG_SYS_CACHELINE_SIZE) {asm volatile("dc zva, %0":: "r"(addr): "memory");addr += CONFIG_SYS_CACHELINE_SIZE;}+}
+void sdram_init_ecc_bits(bd_t *bd) +{
phys_size_t size, size_init;phys_addr_t start_addr;int bank = 0;unsigned int start = get_timer(0);icache_enable();start_addr = bd->bi_dram[0].start;size = bd->bi_dram[0].size;/* Initialize small block for page table */memset((void *)start_addr, 0, PGTABLE_SIZE + PGTABLE_OFF);gd->arch.tlb_addr = start_addr + PGTABLE_OFF;gd->arch.tlb_size = PGTABLE_SIZE;start_addr += PGTABLE_SIZE + PGTABLE_OFF;size -= (PGTABLE_OFF + PGTABLE_SIZE);dcache_enable();while (1) {while (size) {size_init = min((phys_addr_t)SZ_1G, (phys_addr_t)size);sdram_clear_mem(start_addr, size_init);size -= size_init;start_addr += size_init;WATCHDOG_RESET();}bank++;if (bank >= CONFIG_NR_DRAM_BANKS)break;start_addr = bd->bi_dram[bank].start;size = bd->bi_dram[bank].size;}dcache_disable();icache_disable();printf("SDRAM-ECC: Initialized success with %d ms\n",(unsigned int)get_timer(start));+}
+void sdram_size_check(bd_t *bd) +{
phys_size_t total_ram_check = 0;phys_size_t ram_check = 0;phys_addr_t start = 0;int bank;/* Sanity check ensure correct SDRAM size specified */debug("DDR: Running SDRAM size sanity check\n");for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {start = bd->bi_dram[bank].start;while (ram_check < bd->bi_dram[bank].size) {ram_check += get_ram_size((void *)(start + ram_check),(phys_size_t)SZ_1G);}total_ram_check += ram_check;ram_check = 0;}/* If the ram_size is 2GB smaller, we can assume the IO space is* not mapped in. gd->ram_size is the actual size of the dram* not the accessible size.*/if (total_ram_check != gd->ram_size) {puts("DDR: SDRAM size check failed!\n");hang();}debug("DDR: SDRAM size check passed!\n");+}
+/**
- sdram_calculate_size() - Calculate SDRAM size
- Calculate SDRAM device size based on SDRAM controller parameters.
- Size is specified in bytes.
- */
+phys_size_t sdram_calculate_size(struct altera_sdram_platdata *plat) +{
u32 dramaddrw = hmc_readl(plat, DRAMADDRW);phys_size_t size = 1 << (DRAMADDRW_CFG_CS_ADDR_WIDTH(dramaddrw) +DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw) +DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) +DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw) +DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw));size *= (2 << (hmc_ecc_readl(plat, DDRIOCTRL) &DDR_HMC_DDRIOCTRL_IOSIZE_MSK));return size;+}
+static int altera_sdram_ofdata_to_platdata(struct udevice *dev) +{
struct altera_sdram_platdata *plat = dev->platdata;fdt_addr_t addr;addr = dev_read_addr_index(dev, 0);if (addr == FDT_ADDR_T_NONE)return -EINVAL;plat->ddr_sch = (void __iomem *)addr;addr = dev_read_addr_index(dev, 1);if (addr == FDT_ADDR_T_NONE)return -EINVAL;plat->iomhc = (void __iomem *)addr;addr = dev_read_addr_index(dev, 2);if (addr == FDT_ADDR_T_NONE)return -EINVAL;plat->hmc = (void __iomem *)addr;return 0;+}
+static int altera_sdram_probe(struct udevice *dev) +{
int ret;struct altera_sdram_priv *priv = dev_get_priv(dev);ret = reset_get_bulk(dev, &priv->resets);if (ret) {dev_err(dev, "Can't get reset: %d\n", ret);return -ENODEV;}reset_deassert_bulk(&priv->resets);if (sdram_mmr_init_full(dev) != 0) {puts("SDRAM init failed.\n");goto failed;}return 0;+failed:
reset_release_bulk(&priv->resets);return -ENODEV;+}
+static int altera_sdram_get_info(struct udevice *dev,
struct ram_info *info)+{
struct altera_sdram_priv *priv = dev_get_priv(dev);info->base = priv->info.base;info->size = priv->info.size;return 0;+}
+static struct ram_ops altera_sdram_ops = {
.get_info = altera_sdram_get_info,+};
+static const struct udevice_id altera_sdram_ids[] = {
{ .compatible = "altr,sdr-ctl-s10" },{ .compatible = "intel,sdr-ctl-agilex" },{ /* sentinel */ }+};
+U_BOOT_DRIVER(altera_sdram) = {
.name = "altr_sdr_ctl",.id = UCLASS_RAM,.of_match = altera_sdram_ids,.ops = &altera_sdram_ops,.ofdata_to_platdata = altera_sdram_ofdata_to_platdata,.platdata_auto_alloc_size = sizeof(struct altera_sdram_platdata),.probe = altera_sdram_probe,.priv_auto_alloc_size = sizeof(struct altera_sdram_priv),+}; diff --git a/drivers/ddr/altera/sdram_s10.h b/drivers/ddr/altera/sdram_soc64.h similarity index 79% copy from drivers/ddr/altera/sdram_s10.h copy to drivers/ddr/altera/sdram_soc64.h index 096c06cba2..7d018e76d8 100644 --- a/drivers/ddr/altera/sdram_s10.h +++ b/drivers/ddr/altera/sdram_soc64.h @@ -1,15 +1,24 @@ -/* SPDX-License-Identifier: GPL-2.0
- Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
+/* SPDX-License-Identifier: GPL-2.0 */ +/*
*/
- Copyright (C) 2017-2019 Intel Corporation <www.intel.com>
-#ifndef _SDRAM_S10_H_ -#define _SDRAM_S10_H_ +#ifndef _SDRAM_SOC64_H_ +#define _SDRAM_SOC64_H_
-#define DDR_TWR 15 -#define DDR_READ_LATENCY_DELAY 40 -#define DDR_ACTIVATE_FAWBANK 0x1 +#include <common.h> +#include <linux/sizes.h>
+struct altera_sdram_priv {
struct ram_info info;struct reset_ctl_bulk resets;+};
+struct altera_sdram_platdata {
void __iomem *hmc;void __iomem *ddr_sch;void __iomem *iomhc;+};
/* ECC HMC registers */ #define DDRIOCTRL 0x8 @@ -53,32 +62,6 @@ (DDR_HMC_ERRINTEN_SERRINTEN_EN_SET_MSK | \ DDR_HMC_ERRINTEN_DERRINTEN_EN_SET_MSK)
-/* NOC DDR scheduler */ -#define DDR_SCH_ID_COREID 0 -#define DDR_SCH_ID_REVID 0x4 -#define DDR_SCH_DDRCONF 0x8 -#define DDR_SCH_DDRTIMING 0xc -#define DDR_SCH_DDRMODE 0x10 -#define DDR_SCH_READ_LATENCY 0x14 -#define DDR_SCH_ACTIVATE 0x38 -#define DDR_SCH_DEVTODEV 0x3c -#define DDR_SCH_DDR4TIMING 0x40
-#define DDR_SCH_DDRTIMING_ACTTOACT_OFF 0 -#define DDR_SCH_DDRTIMING_RDTOMISS_OFF 6 -#define DDR_SCH_DDRTIMING_WRTOMISS_OFF 12 -#define DDR_SCH_DDRTIMING_BURSTLEN_OFF 18 -#define DDR_SCH_DDRTIMING_RDTOWR_OFF 21 -#define DDR_SCH_DDRTIMING_WRTORD_OFF 26 -#define DDR_SCH_DDRTIMING_BWRATIO_OFF 31 -#define DDR_SCH_DDRMOD_BWRATIOEXTENDED_OFF 1 -#define DDR_SCH_ACTIVATE_RRD_OFF 0 -#define DDR_SCH_ACTIVATE_FAW_OFF 4 -#define DDR_SCH_ACTIVATE_FAWBANK_OFF 10 -#define DDR_SCH_DEVTODEV_BUSRDTORD_OFF 0 -#define DDR_SCH_DEVTODEV_BUSRDTOWR_OFF 2 -#define DDR_SCH_DEVTODEV_BUSWRTORD_OFF 4
/* HMC MMR IO48 registers */ #define CTRLCFG0 0x28 #define CTRLCFG1 0x2c @@ -185,4 +168,19 @@ #define FW_HMC_ADAPTOR_REG_ADDR 0xf8020004 #define FW_HMC_ADAPTOR_MPU_MASK BIT(0)
-#endif /* _SDRAM_S10_H_ */ +u32 hmc_readl(struct altera_sdram_platdata *plat, u32 reg); +u32 hmc_ecc_readl(struct altera_sdram_platdata *plat, u32 reg); +u32 hmc_ecc_writel(struct altera_sdram_platdata *plat,
u32 data, u32 reg);+u32 ddr_sch_writel(struct altera_sdram_platdata *plat, u32 data,
u32 reg);+int emif_clear(struct altera_sdram_platdata *plat); +int emif_reset(struct altera_sdram_platdata *plat); +int poll_hmc_clock_status(void); +void sdram_clear_mem(phys_addr_t addr, phys_size_t size); +void sdram_init_ecc_bits(bd_t *bd); +void sdram_size_check(bd_t *bd); +phys_size_t sdram_calculate_size(struct altera_sdram_platdata *plat); +int sdram_mmr_init_full(struct udevice *dev);
+#endif /* _SDRAM_SOC64_H_ */
2.19.0