On 02/09/15 10:18 AM, Dinh Nguyen wrote:
On 9/2/15 3:18 AM, Marek Vasut wrote:
On Wednesday, September 02, 2015 at 12:41:52 AM, dinguyen@opensource.altera.com wrote:
From: Dinh Nguyen dinguyen@opensource.altera.com
Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is also supported.
Signed-off-by: Dinh Nguyen dinguyen@opensource.altera.com
v2: add ethernet support moved board files to board/terasic/de0-nano-soc/ associate everything with 'de0-nano-soc' or 'de0_nano_soc' based on u-boot-socfpga/wip/boards branch
Applied to wip/boards, thanks. I shuffled the order in arch/arm/mach- socfpga/Kconfig so that things are sorted properly. Can you please double-check that everything builds for you ?
Yes, everything builds for me. Thanks!
Hi Dinh
FYI, I just pulled from wip/boards and built with socfpga_de0_nano_soc_defconfig and booted from SD :
U-Boot SPL 2015.10-rc2-00311-g859de28-dirty (Sep 02 2015 - 14:47:55)
drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
drivers/ddr/altera/sequencer.c: CALIBRATION PASSED
drivers/ddr/altera/sequencer.c: Calibration complete
bad magic
spl: mmc: no boot mode left to try
### ERROR ### Please RESET the board ###
Not sure what I have missed.
Regards Sinan Akman