Re: [U-Boot] [PATCH 1/5] powerpc/b4860qds: add xfi support

On 11/12/2014 07:26 PM, shh.xie@gmail.com wrote:

From: Shaohui Xie Shaohui.Xie@freescale.com

We need following changes to make xfi work on B4:

1. set cross-point switch VSC3308 to use sfp config when running xfi;
2. add 10G interface check for xfi;
3. set phy address for xfi so the 10G ports can be registered by mdio;

Signed-off-by: Shaohui Xie Shaohui.Xie@freescale.com

board/freescale/b4860qds/b4860qds.c | 40 +++++++++++++++++++++++++++------ board/freescale/b4860qds/eth_b4860qds.c | 6 +++++ drivers/net/fm/b4860.c | 4 +++- 3 files changed, 42 insertions(+), 8 deletions(-)

Applied to u-boot-mpc85xx, awaiting upstream.

York