[U-Boot-Users] Flashing Address of U-Boot

Hello everybody,

I just started to work on OMAP 3430 it with porting of LINUX 2.6 on a new board.

thats how i proceed..

I have dowonload the following for OMAP3430 from this source ( http://focus.ti.com/general/docs/wtbu/wtbusplashcontent.tsp?templateId=6123&... )

2.6_kernel-v1.tar.gz u-boot-v1.0b.tar.gz x-load-v1.tar.gz

and compiled using ARM TOOL chain to generate

x-load.bin u-boot.bin vmlinux

Now i have to flash these images into the target.

1.Can any one tell me the exact address location of flash where i should flash it.

Thanks a lot Kapil Kumar

______________________________________________________________________