This includes changes to the ref clock, memory size, the addition of PCI functionality and Makefile options to build either the Rev 3 or Rev 2 U-Boot. The new README explains these options.
Signed-off-by: Martha Marx mmarx@silicontkx.com --- Makefile | 9 ++++----- board/ads5121/README | 9 +++++++++ board/ads5121/ads5121.c | 32 ++++++++++++++++++++++++++++++-- cpu/mpc512x/cpu.c | 8 ++++++-- include/configs/ads5121.h | 22 +++++++++++++++++++--- 5 files changed, 68 insertions(+), 12 deletions(-) create mode 100644 board/ads5121/README
diff --git a/Makefile b/Makefile index 167a717..00d076d 100644 --- a/Makefile +++ b/Makefile @@ -740,12 +740,11 @@ motionpro_config: unconfig ## MPC512x Systems ######################################################################### ads5121_config \ -ads5121_PCI_config \ - : unconfig +ads5121_rev2_config \ + : unconfig @mkdir -p $(obj)include - @if [ "$(findstring _PCI_,$@)" ] ; then \ - echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ - $(XECHO) "... with PCI enabled" ; \ + @if [ "$(findstring rev2,$@)" ] ; then \ + echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ fi @$(MKCONFIG) -a ads5121 ppc mpc512x ads5121
diff --git a/board/ads5121/README b/board/ads5121/README new file mode 100644 index 0000000..0213817 --- /dev/null +++ b/board/ads5121/README @@ -0,0 +1,9 @@ +To configure for the Rev 3.x ADS5121 type +make ads5121_config +This will automatically include PCI and the Real Time CLock abilities, +and set the correct frequency and memory configuration. + +To configure for the Rev 2 ADS5121 type +make ads5121_rev2_config + + diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c index 8629b03..111245d 100644 --- a/board/ads5121/ads5121.c +++ b/board/ads5121/ads5121.c @@ -26,7 +26,9 @@ #include <asm/bitops.h> #include <command.h> #include <fdt_support.h> - +#ifdef CONFIG_MISC_INIT_R +#include <i2c.h> +#endif /* Clocks in use */ #define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ CLOCK_SCCR1_LPC_EN | \ @@ -73,8 +75,21 @@ int board_early_init_f (void) * Without this the flash identification routine fails, as it needs to issue * write commands in order to establish the device ID. */ - *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+#ifdef CONFIG_ADS5121_REV2 + *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1; +#else + if (*((u8 *)(CFG_CPLD_BASE + 0x08)) & 0x04) { + *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1; + } else { + /* running from Backup flash */ + *((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0x32; + } +#endif + /* + * Configure Flash Speed + */ + *((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS0_CONFIG)) = CFG_CS0_CFG; /* * Enable clocks */ @@ -203,6 +218,19 @@ int checkboard (void) reg[i] |= 0x00000003; return 0; } +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + /* + * I2C writes to turn on DVI + */ + static uchar buf[1] = {0xbf}; + + i2c_set_bus_num(2); + i2c_write(0x38, 0x8, 1, buf, 1); + return 0; +} +#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c index bed77ac..b59f36d 100644 --- a/cpu/mpc512x/cpu.c +++ b/cpu/mpc512x/cpu.c @@ -133,8 +133,9 @@ void watchdog_reset (void) #ifdef CONFIG_OF_LIBFDT void ft_cpu_setup(void *blob, bd_t *bd) { - char * cpu_path = "/cpus/" OF_CPU; - char * eth_path = "/" OF_SOC "/ethernet@2800"; + char *cpu_path = "/cpus/" OF_CPU; + char *eth_path = "/" OF_SOC "/ethernet@2800"; + char *eth_path_old = "/" OF_SOC_OLD "/ethernet@2800";
do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1); do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1); @@ -144,5 +145,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
/* this is so old kernels with old device trees will boot */ do_fixup_by_path_u32(blob, "/" OF_SOC_OLD, "bus-frequency", bd->bi_ipsfreq, 0); + do_fixup_by_path(blob, eth_path_old, "local-mac-address", + bd->bi_enetaddr, 6, 0); + do_fixup_by_path(blob, eth_path_old, "address", bd->bi_enetaddr, 6, 0); } #endif diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index 81e7c1e..b0eca9b 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -48,9 +48,15 @@
/* CONFIG_PCI is defined at config time */
+#ifdef CONFIG_ADS5121_REV2 #define CFG_MPC512X_CLKIN 66000000 /* in Hz */ +#else +#define CFG_MPC512X_CLKIN 33333333 /* in Hz */ +#define CONFIG_PCI +#endif
#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ +#define CONFIG_MISC_INIT_R /* call board_misc_init_r() */
#define CFG_IMMR 0x80000000
@@ -60,7 +66,11 @@ /* * DDR Setup - manually set all parameters as there's no SPD etc. */ +#ifdef CONFIG_ADS5121_REV2 #define CFG_DDR_SIZE 256 /* MB */ +#else +#define CFG_DDR_SIZE 512 /* MB */ +#endif #define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ #define CFG_SDRAM_BASE CFG_DDR_BASE
@@ -108,14 +118,20 @@ * [09:05] DRAM tRP: * [04:00] DRAM tRPA */ - +#ifdef CONFIG_ADS5121_REV2 #define CFG_MDDRC_SYS_CFG 0xF8604A00 #define CFG_MDDRC_SYS_CFG_RUN 0xE8604A00 +#define CFG_MDDRC_TIME_CFG1 0x54EC1168 +#define CFG_MDDRC_TIME_CFG2 0x35210864 +#else +#define CFG_MDDRC_SYS_CFG 0xFA804A00 +#define CFG_MDDRC_SYS_CFG_RUN 0xEA804A00 +#define CFG_MDDRC_TIME_CFG1 0x68EC1168 +#define CFG_MDDRC_TIME_CFG2 0x34310864 +#endif #define CFG_MDDRC_SYS_CFG_EN 0xF0000000 #define CFG_MDDRC_TIME_CFG0 0x00003D2E #define CFG_MDDRC_TIME_CFG0_RUN 0x06183D2E -#define CFG_MDDRC_TIME_CFG1 0x54EC1168 -#define CFG_MDDRC_TIME_CFG2 0x35210864
#define CFG_MICRON_NOP 0x01380000 #define CFG_MICRON_PCHG_ALL 0x01100400