22 Jun
2005
22 Jun
'05
2:35 p.m.
Sam Song writes:
Yuli> As I said, it depends on the chip select initialisations. If Yuli> you set BR0_PRELIM to 0xFExxxxxx and OR0_PRELIM to 0xFF8xxxxx, Yuli> U-Boot will crash.
Sam> Oh, such configuration should lead to crash. But how about Sam> OR0_PRELIM set to 0xFExxxxxx?
This would initialise 32MB address space, not 8MB. If you wish to map more flash than you really have, do it. You will see the flash repeated 4 times. Not sure if CFI driver will work with it.
Sam> All I want to say is that BR0[BA] can set as 0xFE00 for 8MB Sam> FLASH case. Yeah, some other related setting must accord with Sam> it.
--
========================================================================
Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader
yuli@arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel
========================================================================