use the configure value for computing the ba_off value not the value from the cr register. This leaded in a wrong ram configuration on the upcoming corvus spl board support.
Signed-off-by: Heiko Schocher hs@denx.de Reviewed-by: Andreas Bießmann andreas.devel@googlemail.com
---
Changes in v3: ignore 80 characters length as Bo Shen and Adreas Biessmann suggested
Changes in v2: add Reviewed-by: Andreas Bießmann andreas.devel@googlemail.com
arch/arm/cpu/at91-common/mpddrc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/at91-common/mpddrc.c b/arch/arm/cpu/at91-common/mpddrc.c index 8136396..f78e4be 100644 --- a/arch/arm/cpu/at91-common/mpddrc.c +++ b/arch/arm/cpu/at91-common/mpddrc.c @@ -26,7 +26,7 @@ int ddr2_init(const unsigned int ram_address, /* Compute bank offset according to NC in configuration register */ ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9; if (!(mpddr_value->cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED)) - ba_off += ((mpddr->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11; + ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;