Am Dienstag, den 23.02.2021, 15:19 +0100 schrieb Reinoud Zandijk:
Hi Daniel,
On Tue, Feb 23, 2021 at 01:03:05AM +0100, Daniel Schwierzeck wrote:
Am Montag, den 22.02.2021, 20:56 +0100 schrieb Reinoud Zandijk:
If I remove it, the machine just spins in Qemu, no output, nothing. If I add it, it works fine again. I found out by bisecting. I have no idea why the tests aren't picking this up. Could it be a qemu/gcc/binutils combination issue? A symbol not set as expected?
qemu 5.1.0 gcc 8.3.0 binutils 2.32
which board config did you try exactly? malta or maltael?
Both malta and maltael have the same behaviour. And yeah, for maltael i needed the u-boot-swap.bin indeed! That was not that obvious at first but trial and error showed it.
How are the tests performed? Are the actual u-boot images passed as compiled with `-bios' to qemu and that alone? Or are the tests also sneaking in the FDT to qemu? By f.e. appending them?
we use the images as built by the default configs. We don't use "-bios" but "-drive if=pflash,file=${U_BOOT_BUILD_DIR}/flash.img,format=raw" to emulate NOR flash and to be closer to hardware.
flash.img is created with that script: https://gitlab.denx.de/u-boot/u-boot-test-hooks/-/blob/master/bin/flash.qemu...