Since commit bcee8d6764f9 ("dm: gpio: Allow control of GPIO uclass in SPL") CONFIG_DM_74X164 is no longer built for mx7dsabresd_defconfig, as this target does not use CONFIG_SPL_GPIO.
Remove such dependency and let the the 74X164 GPIO driver be built again.
This restores Ethernet functionality on the imx7-sdb board as the Ethernet reset PHY comes from a GPIO driven by a 74LV595PW I/O expander.
Fixes: bcee8d6764f9 ("dm: gpio: Allow control of GPIO uclass in SPL") Signed-off-by: Fabio Estevam festevam@gmail.com --- Changes since v1: - Move to the 'ifndef CONFIG_SPL_BUILD' block so that it does not cause issues on SPL targets, such as mx6ul_14x14_defconfig
drivers/gpio/Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 449046b64c..17af123a7d 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -6,13 +6,11 @@ ifndef CONFIG_SPL_BUILD obj-$(CONFIG_DWAPB_GPIO) += dwapb_gpio.o obj-$(CONFIG_AXP_GPIO) += axp_gpio.o +obj-$(CONFIG_DM_74X164) += 74x164_gpio.o endif obj-$(CONFIG_$(SPL_TPL_)DM_GPIO) += gpio-uclass.o
obj-$(CONFIG_$(SPL_)DM_PCA953X) += pca953x_gpio.o -ifdef CONFIG_$(SPL_TPL_)GPIO -obj-$(CONFIG_DM_74X164) += 74x164_gpio.o -endif
obj-$(CONFIG_AT91_GPIO) += at91_gpio.o obj-$(CONFIG_ATMEL_PIO4) += atmel_pio4.o