Re: [Uboot-stm32] [PATCH 1/4] stm32mp: stm32prog: Add Kconfig file for stm32prog command

Hi

On 3/9/21 2:07 PM, Patrice CHOTARD wrote:

Hi Patrick

On 2/25/21 1:37 PM, Patrick Delaunay wrote:

...

Move CONFIG_CMD_STM32PROG in a specific Kconfig file for stm32prog command.

Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com

arch/arm/mach-stm32mp/Kconfig | 18 +----------------- arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+), 17 deletions(-) create mode 100644 arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig

diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index f538d7cb83..079d66a80c 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -121,23 +121,6 @@ config STM32_ETZPC help Say y to enable STM32 Extended TrustZone Protection

-config CMD_STM32PROG

• bool "command stm32prog for STM32CudeProgrammer"
• select DFU
• select DFU_RAM
• select DFU_VIRT
• select PARTITION_TYPE_GUID
• imply CMD_GPT if MMC
• imply CMD_MTD if MTD
• imply DFU_MMC if MMC
• imply DFU_MTD if MTD
• help

• activate a specific command stm32prog for STM32MP soc family
  

• witch update the device with the tools STM32CubeProgrammer,
  

• using UART with STM32 protocol or USB with DFU protocol
  

• NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
  

•     on U-Boot DFU framework
  

config CMD_STM32KEY bool "command stm32key to fuse public key hash" default y @@ -177,6 +160,7 @@ config DEBUG_UART_CLOCK default 64000000 endif

+source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig" source "board/st/stm32mp1/Kconfig" source "board/dhelectronics/dh_stm32mp1/Kconfig"

diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig new file mode 100644 index 0000000000..609a678793 --- /dev/null +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig @@ -0,0 +1,18 @@

+config CMD_STM32PROG

• bool "command stm32prog for STM32CudeProgrammer"
• select DFU
• select DFU_RAM
• select DFU_VIRT
• select PARTITION_TYPE_GUID
• imply CMD_GPT if MMC
• imply CMD_MTD if MTD
• imply DFU_MMC if MMC
• imply DFU_MTD if MTD
• help

• activate a specific command stm32prog for STM32MP soc family
  

• witch update the device with the tools STM32CubeProgrammer,
  

• using UART with STM32 protocol or USB with DFU protocol
  

• NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
  

•     on U-Boot DFU framework
  

Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com

Thanks Patrice _______________________________________________ Uboot-stm32 mailing list Uboot-stm32@st-md-mailman.stormreply.com https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32

Applied to u-boot-stm/next

Thanks

Patrice