On the imx287 pin GPMI_WRN (GPIO0_25) no PullUP is available that can be enabled.
To get the same behavior for both boot select pins (i.e. GPIO0_2{35}) disable pull UPs on both.
Signed-off-by: Lukasz Majewski lukma@denx.de ---
board/liebherr/xea/spl_xea.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/liebherr/xea/spl_xea.c b/board/liebherr/xea/spl_xea.c index d88b75bb3a..192f68fca5 100644 --- a/board/liebherr/xea/spl_xea.c +++ b/board/liebherr/xea/spl_xea.c @@ -20,7 +20,7 @@ #include <asm/arch/sys_proto.h>
#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) -#define MUX_CONFIG_BOOT (MXS_PAD_3V3 | MXS_PAD_PULLUP) +#define MUX_CONFIG_BOOT (MXS_PAD_3V3) #define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) #define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP) #define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)