Am Do., 7. März 2019 um 02:31 Uhr schrieb rosysong@rosinson.com:
From: Rosy Song rosysong@rosinson.com
QCA9563 is CPU used on AP152 board :
Clock speed : 750 MHz , Arch : Mips 74Kc, Eth : SGMII interface, MIMO config : 3 * 3 450M, 2 * USB 2.0,Signed-off-by: Rosy Song rosysong@rosinson.com
Changes for v2:
- coding Style cleanup
- remove ununsed flash chip in defconfig
- enable automatic icache / dcache size in defconfig
Changes for v3:
- add detailed information for qca956x in commit message
arch/mips/dts/Makefile | 1 + arch/mips/dts/ap152.dts | 48 ++ arch/mips/dts/qca956x.dtsi | 87 ++++ arch/mips/mach-ath79/Kconfig | 14 + arch/mips/mach-ath79/Makefile | 1 + .../mach-ath79/include/mach/ar71xx_regs.h | 73 +++ arch/mips/mach-ath79/include/mach/ath79.h | 3 + arch/mips/mach-ath79/qca956x/Makefile | 5 + arch/mips/mach-ath79/qca956x/clk.c | 419 ++++++++++++++++++ arch/mips/mach-ath79/qca956x/cpu.c | 9 + arch/mips/mach-ath79/qca956x/ddr.c | 308 +++++++++++++ .../mips/mach-ath79/qca956x/qca956x-ddr-tap.S | 193 ++++++++ arch/mips/mach-ath79/reset.c | 271 +++++++++++ board/qca/ap152/Kconfig | 15 + board/qca/ap152/MAINTAINERS | 6 + board/qca/ap152/Makefile | 3 + board/qca/ap152/ap152.c | 81 ++++ configs/ap152_defconfig | 49 ++ include/configs/ap152.h | 54 +++ 19 files changed, 1640 insertions(+) create mode 100644 arch/mips/dts/ap152.dts create mode 100644 arch/mips/dts/qca956x.dtsi create mode 100644 arch/mips/mach-ath79/qca956x/Makefile create mode 100644 arch/mips/mach-ath79/qca956x/clk.c create mode 100644 arch/mips/mach-ath79/qca956x/cpu.c create mode 100644 arch/mips/mach-ath79/qca956x/ddr.c create mode 100644 arch/mips/mach-ath79/qca956x/qca956x-ddr-tap.S create mode 100644 board/qca/ap152/Kconfig create mode 100644 board/qca/ap152/MAINTAINERS create mode 100644 board/qca/ap152/Makefile create mode 100644 board/qca/ap152/ap152.c create mode 100644 configs/ap152_defconfig create mode 100644 include/configs/ap152.h
Reviewed-by: Daniel Schwierzeck daniel.schwierzeck@gmail.com
(if the following comment is addressed)
...
diff --git a/include/configs/ap152.h b/include/configs/ap152.h new file mode 100644 index 0000000000..bc88506dff --- /dev/null +++ b/include/configs/ap152.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- Copyright (C) 2018 Rosy Song rosysong@rosinson.com
- */
+#ifndef __CONFIG_H +#define __CONFIG_H
+#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_MHZ 375 +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN 0x40000 +#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
+#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LOAD_ADDR 0x81000000
+#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 +#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1)+/*
- Serial Port
- */
+#define CONFIG_SYS_NS16550_CLK 25000000 +#define CONFIG_SYS_BAUDRATE_TABLE \
{9600, 19200, 38400, 57600, 115200}+#define CONFIG_BOOTCOMMAND "sf probe;" \
"mtdparts default;" \"bootm 0x9f060000"+#define CONFIG_EXTRA_ENV_SETTINGS \
"ipaddr=192.168.1.1\0" \"serverip=192.168.1.10\0" \
boards in mainline must not have any pre-configured network settings. The user should either use "setenv ipaddr" or dhcp".
+#define CONFIG_ENV_SPI_MAX_HZ 25000000 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SIZE 0x10000
+/* Miscellaneous configurable options */
+/*
- Diagnostics
- */
+#define CONFIG_SYS_MEMTEST_START 0x80100000 +#define CONFIG_SYS_MEMTEST_END 0x83f00000
+#endif /* __CONFIG_H */
2.17.1