On 4/9/19 9:02 PM, Simon Goldschmidt wrote:
By enabling debug prints in malloc_simple, we can see that SPL for socfpga gen5 does by far not need the 8 KiB malloc pool currently allocated for SPL in pre-reloc phase.
On socfpga_socrates, 1304 bytes are currently used (and this increases by ~200 bytes only for the sdram/reset fixes in socfpga-next).
To prevent wasting precious SRAM space, let's reduce the initial heap used for SPL to 2 KiB. This is still some hundred bytes more than currently used. Also, the gen5 SPL enables stack and heap in DDR memory pretty early. Only the initial uclass/dm parsing, serial console and DDR initialization is done in the initial heap, so these 2 KiB should be enough for all boards.
Signed-off-by: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com
Changes in v4: None Changes in v3:
- adapt to socfpga-next
Changes in v2:
- added patch to reduce gen5 SPL initial malloc pool to 2 KiB
arch/arm/mach-socfpga/Kconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 3c6c63067d..8f7b79f586 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -6,6 +6,9 @@ config NR_DRAM_BANKS config SPL_STACK_R_ADDR default 0x00800000 if TARGET_SOCFPGA_GEN5
+config SPL_SYS_MALLOC_F_LEN
- default 0x800 if TARGET_SOCFPGA_GEN5
config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE default 0xa2
Acked-by: Marek Vasut marex@denx.de