Add panel_info structure required by LCD driver and DP panel platdata for SMDK5250. Enable FIMD and DP support on SMDK5250. DP Panel size: 2560x1600. We use 16BPP resolution to get LCD console.
Signed-off-by: Ajay Kumar ajaykumar.rs@samsung.com --- board/samsung/smdk5250/smdk5250.c | 82 +++++++++++++++++++++++++++++++++++++ include/configs/smdk5250.h | 9 ++++ 2 files changed, 91 insertions(+), 0 deletions(-)
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 4c50342..e3d6ac1 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -24,12 +24,15 @@ #include <asm/io.h> #include <i2c.h> #include <netdev.h> +#include <lcd.h> #include <spi.h> #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/power.h> #include <asm/arch/pinmux.h> #include <asm/arch/sromc.h> +#include <asm/arch/dp_info.h> #include <pmic.h>
DECLARE_GLOBAL_DATA_PTR; @@ -181,6 +184,85 @@ static int board_uart_init(void) return 0; }
+vidinfo_t panel_info = { + .vl_freq = 60, + .vl_col = 2560, + .vl_row = 1600, + .vl_width = 2560, + .vl_height = 1600, + .vl_clkp = CONFIG_SYS_LOW, + .vl_hsp = CONFIG_SYS_LOW, + .vl_vsp = CONFIG_SYS_LOW, + .vl_dp = CONFIG_SYS_LOW, + .vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */ + + /* wDP panel timing infomation */ + .vl_hspw = 32, + .vl_hbpd = 80, + .vl_hfpd = 48, + + .vl_vspw = 6, + .vl_vbpd = 37, + .vl_vfpd = 3, + .vl_cmd_allow_len = 0xf, + + .win_id = 3, + .cfg_gpio = NULL, + .backlight_on = NULL, + .lcd_power_on = NULL, + .reset_lcd = NULL, + .dual_lcd_enabled = 0, + + .init_delay = 0, + .power_on_delay = 0, + .reset_delay = 0, + .interface_mode = FIMD_RGB_INTERFACE, + .dp_enabled = 1, +}; + +static struct edp_device_info edp_info = { + .disp_info = { + .h_res = 2560, + .h_sync_width = 32, + .h_back_porch = 80, + .h_front_porch = 48, + .v_res = 1600, + .v_sync_width = 6, + .v_back_porch = 37, + .v_front_porch = 3, + .v_sync_rate = 60, + }, + .lt_info = { + .lt_status = DP_LT_NONE, + }, + .video_info = { + .master_mode = 0, + .bist_mode = DP_DISABLE, + .bist_pattern = NO_PATTERN, + .h_sync_polarity = 0, + .v_sync_polarity = 0, + .interlaced = 0, + .color_space = COLOR_RGB, + .dynamic_range = VESA, + .ycbcr_coeff = COLOR_YCBCR601, + .color_depth = COLOR_8, + }, +}; + +static struct exynos_dp_platform_data dp_platform_data = { + .phy_enable = set_dp_phy_ctrl, + .edp_dev_info = &edp_info, +}; + +void init_panel_info(vidinfo_t *vid) +{ + vid->logo_on = 1, + vid->rgb_mode = MODE_RGB_P, + + exynos_set_dp_platform_data(&dp_platform_data); + exynos_pinmux_config(PERIPH_ID_LCD, NULL); +} + #ifdef CONFIG_SYS_I2C_INIT_BOARD static int board_i2c_init(void) { diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index e412da8..9489714 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -256,6 +256,15 @@ #define CONFIG_SOUND_WM8994 #endif
+/* Display */ +#define CONFIG_LCD +#define CONFIG_EXYNOS_FB +#define CONFIG_EXYNOS_DP +#define LCD_XRES 2560 +#define LCD_YRES 1600 +#define LCD_BPP LCD_COLOR16 +#define CONFIG_CMD_BMP + /* Enable devicetree support */ #define CONFIG_OF_LIBFDT