From: Shaohui Xie Shaohui.Xie@nxp.com
To use AQR405 PHY's interrupt, we need to invert the relative IRQ pins polarity by setting IRQCR register, because AQR405 interrupt is low active but GIC accepts high active.
Signed-off-by: Shaohui Xie Shaohui.Xie@nxp.com --- changes in v2: 1. move Interrupt register offset define to immap_lsch3.h.
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 4 ++++ board/freescale/ls2080ardb/ls2080ardb.c | 4 ++++ include/configs/ls2080ardb.h | 1 + 3 files changed, 9 insertions(+)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index cd96604..f182dea 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -94,6 +94,10 @@ #define DCFG_DCSR_BASE 0X700100000ULL #define DCFG_DCSR_PORCR1 0x000
+/* Interrupt Sampling Control */ +#define ISC_BASE 0x01F70000 +#define IRQCR_OFFSET 0x14 + /* Supplemental Configuration */ #define SCFG_BASE 0x01fc0000 #define SCFG_USB3PRM1CR 0x000 diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index 2ae9d6c..da227a7 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -149,6 +149,7 @@ int board_init(void) { char *env_hwconfig; u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; + u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE; u32 val;
init_final_memctl_regs(); @@ -170,6 +171,9 @@ int board_init(void)
QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);
+ /* invert AQR405 IRQ pins polarity */ + out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK); + return 0; }
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 65d4f64..0d60420 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -336,6 +336,7 @@ unsigned long get_board_sys_clk(void); #define AQ_PHY_ADDR2 0x01 #define AQ_PHY_ADDR3 0x02 #define AQ_PHY_ADDR4 0x03 +#define AQR405_IRQ_MASK 0x36
#define CONFIG_MII #define CONFIG_ETHPRIME "DPNI1"