Hi Marek,
On Tue, 18 Jun 2024 at 16:30, Marek Vasut marex@denx.de wrote:
On 6/18/24 2:43 PM, Simon Glass wrote:
Hi again,
On Tue, 11 Jun 2024 at 12:51, Simon Glass sjg@chromium.org wrote:
Hi,
On Fri, 24 May 2024 at 10:26, Fabio Estevam festevam@gmail.com wrote:
On Tue, May 21, 2024 at 7:48 AM Marek Vasut marex@denx.de wrote:
Add new binman etype which allows signing both the SPL and fitImage sections of i.MX8M flash.bin using CST. There are multiple DT properties which govern the signing process, nxp,loader-address is the only mandatory one which sets the SPL signature start address without the imx8mimage header, this should be SPL text base. The key material can be configured using optional DT properties nxp,srk-table, nxp,csf-crt, nxp,img-crt, all of which default the key material names generated by CST tool scripts. The nxp,unlock property can be used to unlock CAAM access in SPL section.
Reviewed-by: Tim Harvey tharvey@gateworks.com Signed-off-by: Marek Vasut marex@denx.de
Applied the series, thanks.
This lacks tests - can you please add sufficient tests in ftest.py to get the cover coverage back to 100%? Please try 'binman test -T' to see this.
Any thoughts on this, please? At present -master is broken for one file and -next has three problems.
It is in the pipeline.
What exactly is the error you observe ?
When I run binman test -T , I get a lot of output, but no error reports?
Sorry I somehow missed this email.
The tests are in ftest.py - there are lots of examples, e.g. testXilinxBootgenSigning() - commit d8a2d3b29
Basically you need to create a test .dts file that uses your entry type, then use it in the test code. You can check error handling as well, e.g. by having an invalid dts too if needed.
If you run 'binman test -T' you will see the code-coverage problem. You may need to fetch tools with 'binman tool -f missing' to get all the tools*:
Coverage error: 96%, but should be 100% ValueError: Test coverage failure
It is normally much easier to add an etype using a test than to test it by using it 'for real', since you don't need to worry about the U-Boot integration.
* There are some annoying things though, such as mkeficapsule being old in the u-boot-tools package so not supporting the tests properly. Also testTIBoardConfigLint needs 'pip install yamllint'
Regards, Simon